Tiptel3275 User Guide 1
Content 1 Product Overview ........................................................................................................ 5 1.1 Instruction ........................................................................................................ 5 1.2 Technical Specification ..................................................................................... 6 1.3 Equipment Appearance And Interface Description ......................................... 7 1.3.1 Interface Description.................
.5.6 Time out .............................................................................................. 31 3.5.7 Playtone .............................................................................................. 31 3.6 Personalize ..................................................................................................... 31 3.6.1 Log Level.............................................................................................. 32 3.7 Reboot Manager .................................
.11.1 Add An Account................................................................................. 65 4.11.2 View Calendar ................................................................................... 65 4.11.3 New Activities ................................................................................... 66 4.11.4 Edit Activities..................................................................................... 67 4.11.5 Delete Activities .....................................................
1 Product Overview 1.1 Instruction Tiptel 3275 is an Android-based multimedia terminal with a 7 inch touch screen and a 2M CMOS sensor camera. It supports H.264/H.263 codec with adaptive bandwidth adjustment. The 7 inch touch screen offers excellent user experiences such as high quality videophone, smooth internet surfing, various Android Apps and daily information. Tiptel 3275 provides 2 Ethernet ports, 1USB, 1HDMI, and one 3.5mm headset/audio port.
1.2 Technical Specification Model Graphic Display Camera Network Protocol Operation System Voice Codec Video Codec DTMF Modes Audio Features Video Features Others Network Interface Wi-Fi Expansion Interface IP assignment Management Dimension Tiptel 3275 7 inch capacitive touch screen TFT LCD, 800x480 pixels, 16:9 wide screen aspect ratio 2 mega pixels CMOS camera, free rotation SIP RFC3261,TCP/UDP/IP,PPPOE,RTP/RTCP Android 4.2 G.711A/U, G.723, G.729a/b, G.
1.
USB HDMI Headset Figure 1-3 3275 Profile View 1.3.1 Interface Description Interface Description Camera USB interface Adjustable camera shooting angle, rotate down the camera to "off" angle. External USB storage device Headset Connect to 3.5mm stereo headphone, headset device HDMI Use HDMI cable to output the video to a TV screen LAN Power Network interface can be connected to a hub, switch or other network access devices. It also supports POE(Power over Ethernet).
Volume Press + or – for the phone volume adjustment Standard Keypad Input the number or symbol Function Key Delete Delete a character before the cursor OK Same function with soft keyboard "Enter" key Message Optional Contact Enter Into the contacts list, you can view the local contact Conference Hold The first party is held in the case, according to a conference key, the first party can be combined to achieve a tripartite meeting To hold a call during the call Transfer To transfer the curre
2 Installation 2.1 Equipment Packaging Name Quantity Main Case 1 Handset 1 Phone Cord 1 Power Adapter 1 Ethernet Cable 1 Quick Start Guide 1 2.
Connecting to Network Use the matched network cable to connect the LAN Port of the video phone to the Router or Switch. Viewing the top right corner of the screen, if the indicator light is on, network cable is connected properly. Connecting to PC Use the matched network cable to connect the PC Port of the video phone to the PC’s Ethernet port. The PC can access to the internet network via PC Port of the video phone. 2.
3 Getting Started 3.1 Basic Operation 3.1.1 Main Screen Instruction Status bar, at the top of the screen, displaying the status of system information. Do Not Disturb plug-in, When enabled DND, prohibit incoming calls in; Incoming call will be normal when DND is closed Accounts, Display number of the current account,and show the status. Extended Screen Prompt, Display the location of current screen page; and show how many pages extended.
Status Area Icon Description Network is connected Network is not connected Mute mode Alarm clock is set PPPOE is connected PPPOE is failed Notification Area Icon Description SIP account is registered Missed call, number means how many missed calls downloading uploading Receives a new email An event is coming 3.1.3 Using The Touchscreen Tap To select items on the screen (e.g., setting options, apps); to press onscreen buttons; to type letters and symbols using the onscreen keyboard.
Drag Touch and hold an item for a few seconds first. Once the item has a red frame activated, or a move option shows up, keep your finger on the screen and move it until the target position is reached. Then lift your finger up to release. Slide Move your finger fast across the screen to slide. To view different idle screens or menu pages, slide left or right; to view the status bar on top of the screen, place your finger on the bar and slide it down.
To turn off notifications, simply hold the notice at the bottom of the screen and then drag up or press the "Back" on the hard keyboard. Click on the icon to clear up the notice 3.2 Connecting To Network And Wi-Fi Tiptel 3275 supports a variety of network connections (Ethernet, Wireless) and device connections. Network connections includes four modes, Static IP, DHCP, PPPOE, Wi-Fi access. DHCP is the default configuration. Device connections include EHS headset, USB and Bluetooth device. 3.2.
->SETTINGS-> Mode 4: In ->Wireless & Networks-> Ethernet->Use static IP. the main screen,tap ->Network Settings->LAN Connecting->Static IP. Configuration page is shown as below： Configuration parameter specification： Parameter Specification IP address set the IP address of the device Subnet Mask set the subnet mask of the device Default Gateway set the default gateway DNS Server set the DNS address Alternative DNS Server set the backup DNS address 3.2.
Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS> Mode 4: on the status bar ->Wireless & Networks-> Ethernet-> uncheck Use static IP. In the main screen,tap ->Network Settings->LAN Connecting->DHCP.
Mode 2: In the main screen, tap -> Settings-> Wireless & Networks-> Ethernet -> More ->PPPOE. Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS Mode 4: on the status bar ->Wireless & Networks-> Ethernet-> More ->PPPOE.
1) After dialing, can display the acquired IP address, server IP, the primary DNS, Secondary DNS information, status as connected 2) Not Dial, IP address information will be 0.0.0.0 3) There is a redial entry under Alternate DNS, click redial, then re-launch a PPPOE dial-up process, re-dial. 3.2.
2) When connects to available AP in the environment, if a Wi-Fi AP is without password protection, there is no lock icon on Wi-Fi signal, it will automatically connect when clicked; 3) If a Wi-Fi AP is encryption, Wi-Fi signal will be added the lock icon, and when checked, it will pop up a dialog box to enter a password. If the password is incorrect, the connection will not be successful, as shown below: 4）check Show advanced options, you can set Proxy server and IP mode.
IP settings(Static IP): 5）Long press on the connected Wi-Fi AP, it will pop-up a dialog box, you can forget the network or modify the network. Long press on the non-connected Wi-Fi AP, it will pop up a dialog box, and you can click and connect to network. 6）Click WPS button, if the wireless router has WPS function, and the router WPS button is pressed, the video phone will be able to connect to the Wi-Fi without entering a password. 7）Press “+ ”symbol，you can add a SSID manually.
8）Click Menu, you can do the operations such as: Scan(scan the new wi-fi AP), WPS Pin Entry(enter the PIN on the Router, the phone will no need to input the wi-fi password), Wi-Fi Direct and Advanced. 9）In Advanced Menu, shown as below: a. Check Network notification, it will notify you when an open network is available; b. Check Avoid poor connections, it will prompt that don’t use a WiFi network unless it has a good internet connection; c. View the Wi-Fi Mac address and IP address; 3.
3.3.
Configuration parameters are described as follows: Parameter Specification Register Name SIP Accout ID provided by ISP User Name SIP User Name provided by ISP Password SIP Password provided by ISP Display Name SIP Display name Reg Server IP SIP Register Server, format: domain/IP, for example: 194.168.1.2 Reg Server Port The default port is 5060. Proxy Server IP SIP Proxy Server, format: domain/IP, for example: 194.168.1.2 Proxy Server Port The default port is 5060.
the status bar. See the below picture： a. if you want to disable the account, please click b. if the sip account is failed to register, the prompt “ Register Failed” will be displayed under the account, and then you can check with the account configuration or network connection. See the below picture: 3.3.
2）Remove the sip account: Click the box of the account which you want to delete, and then press “Clear Account”. 3.4 Sound You can select one of the following methods to enter the Sound configuration: Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System Settings-> Sound. Mode 2: In the main screen, click Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS -> Settings -> Sound. ->Sound.
Including Volume, Ringtone and Notification, Dial pad touch tones and Touch sound. 3.4.1 Silent Mode Long press the Power /Suspend button, then choose Silent mode in the pop-up menu. In addition to the media and the alarm sound, the rest sound is mute.
3.4.2 Volumes In Sound configuration page, click “Volumes”, the volume configure is shown as below： Volume options include ringtones and notifications, Media, Alarm clock. You can hold and drag the slide button or just directly click a volume location to adjust the volume. Finally click "OK" button to save. The volume settings, you can also press the keyboard "volume+ -" button to increase or decrease the volume.
configuration page to click the corresponding sound. Dial pad touch tones and Touch sounds are enabled in default configuration. 3.5 Call Settings 3.5.
phone call is unable to call in, turned off by default. Configuration on the phone: 1.Phone Settings->Call Settings->Call Forwarding 2.Select the desired account. 3.Enable Do not Disturb. 3.5.2 Call Waiting Open call waiting, if enable call waiting, after establishment of a conversation, there are a third party call in, then video phone will have a new call tips, you can choose to answer or reject the call.
3.5.5 No Answer Forwarding&Forwarding Number The incoming calls will be the Switched to the specified number when the ring tone is time out without answer. Configuration on the phone: 1. Phone Settings->Call Settings->Call Forwarding. 2. Select the desired account. 3. Enable No Answer Forwarding. 4. Input the number you want to forward. 3.5.6 Time out Setup the no answer forwarding time. When the call is beyond the time(the default is 30 seconds)without answer ,it will transfer to the target number. 3.5.
3.6.1 Log Level The Log level is divided into seven levels: EMERG, ALERT, CRIT, ERR, WARNING, NOTICE, INFO, DEBUG, log class is from low to high. The default setting is CRIT. 3.7 Reboot Manager This function can be operated via Autop Function. 3.7.1 Reboot time User can setup the reboot date and hour you want . 3.7.2 Status of time If the status is enable ,users can edit the reboot time you want. 3.7.
3.7.4 Reboot settings Click the icon 3.8 to reboot. Date & Time You can select one of the following methods to enter Date & Time configuration: Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System Settings-> Date & time. Mode 2: In the main screen, tap Mode 3: Drag down the status bar, click shortcut icon ->SETTINGS> -> Settings-> Date & time. on the status bar -> Date & time.
You can increase or decrease the corresponding value by dragging upper or lower, also can directly input corresponding value in input flied, and then click the "Done" button. Click "Set time, time settings, as shown below: In the figure, uncheck Use 24-hour format, you can increase or decrease the corresponding time value by dragging upper and lower. Click "AM" button, it will change to "morning", and then click "PM" button, then changed back to "afternoon".
3.9 Personalization Settings According to personalized settings, you can make the equipment more characteristic. 3.9.1 Wallpaper You can use the following three ways to change your favorite wallpaper. Mode 1: 1) You can choose one of the following steps to enter into the choice of wallpaper source: In the main screen, Press "Menu" on the keyboard-> wallpaper, it will pop up wallpaper selection interface to select a wallpaper source.
When clipping, if want to change clip size of the box, press clipping frame, the border follows the direction of the arrow to be shown in the figure, you can drag it to the border or outside the borders, to change the size of the crop box. Mode 2: Browse pictures in the gallery, and then follow the second step in mode 1 to set the wallpaper. Mode 3: 1) Browse a picture In a browser (or pictures on the page), press and hold the picture.
following window: 2) Each widget has indicated the name and the location, press and hold the component, put it to the designated location on the desktop. 3.9.2.2 Modify An Added Widget If you want to modify the location of added widgets on the desktop, hold the widget until the icon appears on the upper left corner of the screen, you can drag the widget to the corresponding position of the desktop.
At this time, you can press the arrow button to drag the border to change the size of the widget frame. And then only need to press “Back” button on the keyboard to save the change. 3.9.2.3 Delete A Widget Hold the widget until the icon you can drag the widget to appears on the upper left corner of the screen, to delete the widget. 3.9.3 Shortcuts You can add the shortcuts such as Application, Webpage bookmarks and so on to the main screen desktop. 3.9.3.
shortcut to the corresponding position of the desktop. 3.9.3.3 Delete A Shortcut Hold the shortcut until the icon you can drag the shortcut to appears on the upper left corner of the screen, to delete the shortcut. 3.9.4 Modify Extended Bar You can modify the quick start program on the extended bar at the bottom of the screen.
3.10 Backup & Reset 1) Click Setting ; 2) Click “Backup & reset”; 3) Click “Factory data reset”; 4) Click “Reset Multimedia Terminal” 5) Click “Erase everything”.
4 Function 4.1 Call Function Video phone supports voice calls and video calls. Please ensure that the device has been configured SIP account successfully before using the call function. SIP account configuration refers to section 3.3. 4.1.1 Make A Call You can directly dial from the keypad, from the contact or from call records. 4.1.1.1 Dial Out Directly 1) You can choose one of the following steps to enter into the dialing interface: Directly pick up the handle.
1) By pressing the number keys on the dial interface or directly pressing the number on keypad. To delete a number, press the on the dial interface, or press Delete button on the keypad. 2) If you want to make an audio call, please click "Audio Call"; if you want to make a video call, please click "Video Call". 3) If you have registered a multiple of available SIP accounts, when finishing dialing, you can click line button to choose the outgoing account for the number, as shown below: 4.1.1.
Contact is shown as below： Contact supports rapid locating the contact through first letter. 1) Click the contact in Contacts, and you can view the details on the right side. As shown in below picture： 2) You can click click 4.1.1.3 to make an audio call, or click to make a video call, or to send a message .
4.1.2 Receive A Call Incoming calls include audio and video calls, If the caller has been stored in the contacts, it will show the contact name, otherwise the caller number will be displayed. 4.1.2.1 Answer A Call 1) Answer an audio call When receiving an audio call, as shown below： Click “Audio” or pick up the phone to answer.
Click "Audio" to establish the audio call, and video is not visible; click "Video" to establish the video call, and video is visible. Pick up the handle is to answer the call as a video call. 3) Answer a video invite During an audio call, if a video invite is requested, it will pop up the following window: Click “Accept” to accept the video invite, and then the call will change to video call; Click “Reject” to reject the video invite, audio call will retain.
4.1.3 Call Options Call options as shown below: Call options are described as below: Click the button to hold the current call. Click the button to resume the current call. Transfer Mute Click to switch to audio call Click to switch to video call Click to switch to Speaker Click to switch to handset Extended function Function under development 4.1.3.1 Dialing Interface Click the " keyboard” in the conversation, screen will appear the soft keyboard.
Switch to full screen 4.1.3.3 Multiple Calls The Phone supports more than 3 line calls. The line information is on the right side of call interface. During a call, you can click on the button to add a new call. And when click on this button, the current call will be hold. During a call, you can click on any line in the list to resume the call. 4.1.4 Call Records 4.1.4.1 View Call Records When got a missed call, the screen will display the missed call notification in above status bar.
1) you can click the drop-down list to choose the call record types, it supports for all call, missed call, received call, and dialed call four types of call information. 2) Call records are shown on the left, and show the total number in the bracket. Click the number or contact, and you can view all the call records details on the right. 4.1.4.
4.1.4.3 Delete Call Records 1) If you want to delete one call record, steps as below: Long press the call record you want to delete; Pop-up a menu, press “Confirm” to confirm the deletion. 2) If you want to delete multiple call records, steps as below: Press the icon on the top right corner; Click the call records you want to delete; Click 3) If you want to delete all call records, steps as below: Press the icon Click on the top right corner; to select all records; Click 4.1.4.
Enter the dialing interface, and then click the icon 4.2.1 Contacts You can view, audio call, video call, add, edit, delete the contacts. 4.2.1.
Edit the contact photo, Browse the image from “Take Photo” or “Choose photo from Gallery” Delete the note Cancel the edit Save the contact Some more information If you want to add some more information, please click page of contact details, as shown: 51 ，it will pop up the
Click to save the contact. 4.2.1.2 Modify The Contact 1) Select the contact you need to modify in the contact list; 2) Click ; 3) Enter into contact edit page, you can edit the contact information. 4.2.1.
4.2.1.4 Click Search The Contact in Contact page or directly press the number button on keypad to search the number. When you input numbers, the system will list the current matching results for searching, you can also use the on-screen keyboard to input the letters. 4.2.1.5 Merge The Contact When the contact is repeated, click , and then click “Merge Contacts”, the repeated contacts will be combined into one contact. 4.
4. When the second party answer your call ,press the Conference softkey or the Conference key on the keypad to start 3-way conference.
4.4 Transfer 4.4.1 Blind Transfer When the IP phone blind transfers a call. 1. Pick up a call,press transfer key on the keypad or click 2. Drag down the current call into the gray box 3. Press . to enter the target number,then click Confirm.
4. Click Blind to transfer the number. 4.4.2 Attended Transfer When the IP phone performs the semi-attended/attended transfer. 1. Pick up a call,press transfer key on the keypad or click 2. Drag down the current call into the gray box 56 .
3. Press to enter the target number,then click Confirm. 4. Click Attended to transfer the number.
4.5 Keypad Input Only numbers, * and # can be input by keypad. The default Input method is Android keyboard. You can also download your preferred input method from the internet. 4.6 Webpage Browser This section describes the default web browser in the video phone, and you can also download your preferred browser through the internet. You can use one of the following methods to run the browser: Mode 1: In the main screen, click ; Mode 2: In the main screen, click -> . 4.6.1 Open The Webpage 4.
Add a new webpage View the bookmark and browsing history Others 4.7 Camera Open the camera: in the main screen, click -> 。 You can view your photos and videos in “Gallery” 4.7.1 Photograph Mode Turn on the camera, and the default mode is photograph mode. 4.7.1.
menu Setting White balance setting 4.7.1.2 Mode Switch Click on the lower right corner to swith the mode. Panoramic camera mode Video mode Photo mode 4.7.1.3 Take A Photograph You can click on the center button on the right side to take pictures. It supports automatic focusing, if you want to adjust the focal length, please use two fingers to press on the screen, shrinkage or expansion to adjust the focal length.
4.7.1.4 Take A Video Click -> to swith to video mode. Click ，video starts when the icon turns to . And click to stop the video recording and save. 4.8 Gallery You can use Gallery to view photos or videos, and you can also view the picture or video downloaded from the Internet. You can edit the photo or picture and set it as wallpaper. You can follow the below method to enter into the gallery: In the main screen, click -> 4.8.
Click the icon on the upper left corner, and you can view photos and videos in groups in the drop-down list. Click on the folder to view all the photos. While viewing photos, you can use two fingers to press on the screen, shrinkage or expansion to shrink or enlarge the image. 4.9 Bluetooth Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances from fixed and mobile devices, creating personal area networks with high levels of security.
Press on screen and click on -> Wireless & Networks. 4.9.1 Turning Bluetooth On /Off Go to Tiptel 3275’s Settings; Click on Wireless & Networks; Click or untick the option for Bluetooth. 4.9.2 Changing Bluetooth Device Name The Tiptel 3275 uses “Tiptel 3275” as Bluetooth device name by default. The device name will be visible to other devices when connecting them.
FOR DEVICE; The discovered device will show in the scan result list with device ID. If it’s unpaired, it will show “Pairing” under the device ID. Make sure the Bluetooth device is active in pairing mode. Then tap on the device ID on the Tiptel 3275 to pair them. Confirm the passkey in the prompted message (if any). Or if PIN is required, please refer to the device’s documentation or other procedures to obtain the PIN. 4.9.
As shown below： If one day has activity, color will appear on the calendar to remind. 4.11.1 Add An Account While using the calendar at the first time, it will remind you to add an account. Click ”Add account” to add an account, and then synchronize all the schedules of the account to the calendar. 4.11.2 View Calendar The calendar will display monthly by default, and you can slide the calendar up and down to view the different months.
or week. Click the date on the upper left corner, it will display the drop-down list , Calendar displaying mode can be selected as daily, weekly or monthly. 4.11.
3) Click “Done” to finish. 4.11.4 Edit Activities You can click on schedule needed to be modified to edit the schedule. 4.11.5 Delete Activities While viewing the activity, you can click “DELETE” on the upper right corner to delete the activity. 4.
Description: Alarm Countdown timer Stopwatch Time zone Others 4.12.
2) Click ; 3) Input the time of alarm: 4) If you want to repeat the alarm in some days of a week, please click “REPEAT”; 5) You can choose the ringtone of the alarm. 4.12.1.1 Enable/Disable Alarm You can click ON/OFF to enable or disable the alarm. Note: if power off the phone, the alarm will also be off.
4.12.1.2 Modify Alarm If you want to modify the status of the alarm, including time, repeat data, alarm ringtone, you can directly click on the alarm. 4.12.1.3 Delete Alarm In Alarm page, you can use the following method to delete the alarm: Press and hold the alarm, after pop-up the dialog box, click , and then click “OK” 4.12.2 Countdown Timer 1) Click 2) Click the number to set the countdown time.
4.12.3 Stopwatch 1) Click ; 2) Click “START” or “STOP” to start or stop the stopwatch; 3) Click the time icon to start a new time; 4) When the time is on hold, click to reset the timer. 4.13 Email Email Application can let you use POP3 or IMAP service to send and receive e-mail. Start Email： In the main screen, click ->Email 4.13.1 Add A New Email Account Make sure the email account has enabled POP3 or IMAP service, and you can add many accounts.
If you have already set up an email account, In the main Email page, Press “Menu” button, and then click “Account”, and last press ”Menu” to “Add Account”. 2) Input the email account and password, and then click “Next”; If there is no account type in the equipment database you want to set, the device will require you to enter more detailed information (the receiving server settings and outgoing server settings). 3) Input the account name and your name, click OK. 4.
You can click the labels of Artists, Albums or Songs to view all songs. You can also view or play the songs from the playlists. To view the currently playing song, please click the "now playing" label 4.15 Explorer You can use explorer to manage the files in the device.
Home Page Upper Layer Multiple Choices, And the selected file will change to blue color. Editor, you can do Copy, Delete, Move, Paste, Rename, Send, Create shortcut operations. New Folder Previous File Next File If you insert a SD card, you can view the files in SD card. (Optional) View the internal files of the device View the files in inserted USB device 4.16 Video Player You can use video player to play local videos.
Bookmark Screen Brightness Adjustment The previous video, and long press to make video fast backward. Hold/Play The next video, and long press to make video fast forward. Screen size adjustment, four type of video sizes: original size, full screen, 16:9, 4:3 Floating browse mode Others 4.16.1 Floating Browse Mode Click on during playing a video to enter the floating browse mode.
You can click on to play the video, click to shrink the floating window. And use two fingers to press on the screen, shrinkage or expansion to adjust the window size. If you want to close the floating window, please long press the floating window until it displays 4.17 icon in the center, click on the icon to close the floating window. Others 4.17.1 Apk Installer You can use Apk Installer to install the apk application In the main screen, click ->Apk Installer.
4.17.1.1 Install You can click “Install”, and then browse the path: The system will list all the Apk applications under the path, click the Apk to install. 4.17.1.2 Manage You can click on "Manage" button to browse the Apk installed in the system. 4.17.2 Ping Tool You can use the Ping tool for Ping query, network packet capture and view the log information.
4.17.2.1 Ping Query Ping query interface is as shown： You can input the address you want to Ping, click the Ping button, you can view the Ping query results. If you take a long Ping query, in the input box, please manually enter the Ping + address, such as: , and then click the Ping button. 4.17.2.
You can choose what type protocol and specified port you need to capture the logs. Press “Start Tcpdump” to start the log captured. If you want to finish the log captured, you can press “Stop Tcpdump” to stop the capture, and the system will prompt the file saved path. You can use Wireshark and other tools on PC to read the logs. 4.17.2.
You can use to search the log information, and select the log level through the drop-down list. Or click to see more options. if you need to save the log, please click , select "Save" If you need to highlight the log information, please click then the log will be showed as different color.
5 Software Upgrade 5.
5.1.1 Select Other Upgrade Package 1) Via USB to Upgrade Put upgrade package into USB, insert USB, then click “Select other upgrade package”, find “/mut/usb_storage”, find the upgrade package, then click “OK” to upgrade. 2) Via Internal Memory to Upgrade Use USB to copy the upgrade package into Internal Memory, then press “Select other upgrade package”, find “/mnt/sdcard”，find upgrade document, then click “OK” to upgrade. 5.1.
2) Via built-in SD Card to upgrade First, change the name of upgrade package into “upgrade.zip”, then copy it into USB, and then use USB to copy the upgrade package into Internal Memory, enter the upgrade interface, you package:/mut/sdcard/upgrade.zip, will find because the video path phone of has upgrade searched it automatically, press “Local Update” to start upgrading. 5.1.
2) Click “Remote Upgrade”, video phone will check the new version automatically. If exist a new version, it will prompt. Press “OK” to download upgrade document. 3) After finish downloading, it prompts “Download update image success! You need to restart system for update! ”, press reboot now, and then system will upgrade automatically. As shown: 5.2 Auto Update Period Auto Update Period includes four modes: None, One Day, One Week, and One Month.
The terminal will detect the new version automatically in time, if there is, the status bar will show “There is a new version, please update!”. Click and download the image for upgrade. As shown: 5.3 Upgrade on the web 1.Click Upgrade->Basic 2.Choose the software you want to update from the computer. 3.Click .
5.4 Check Update After System Power On Click “Check Update After System Power On” in figure 5-1. Every time you power on, the system will check the new version automatically. If there is a new one, the status bar will notice: “System has new version, please update now!”, click and download the image for upgrade.
6 System Maintenance 6.1 System State Inspection Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System Settings-> About Multimedia Terminal Mode 2: In the main screen, click -> -> About Multimedia Terminal It will display phone status, software version and hardware version in this item. 6.
Mode 3 and Mode 4 can check the corresponding network information in setting interface. 6.3 SIP Account Registration Query You can choose one of the following methods to enter the SIP account registration query: If the account is successfully registered, the icon will be light up in notification area of phone.
Mode 1: Press Speaker button or pick up to enter the dialing interface, click on upper right corner, check Account Manager. Mode 2: Slide down the top-left , click the account, enter the setup interface, check Account Manager. 6.
Please check whether the outlet is working properly. Failure 2: No voice when pick up the handle Please check whether the connection of handset and base is working properly; Please adjust the volume + key on keyboard when off-hook the phone, Observe the display of “volume” prompt. Please pay attention that the volume key in on-hook and off-hook situation is to adjust the ring volume and media volume (call volume) separately. These two adjustments are unrelated.
7 Web Interface 7.1 1. 2. 3. Web login Open the browser on your computer. Input the IP address in the address bar. Enter the user name and password(user name:admin,password:admin), then click 7.2 . Status->Basic Click Status->Basic to check the phone information.
Sections Product Information Network Information Account Information Description To display the device’s information such as Model name, MAC address (IP device’s physical address),Hardware Model, Firmware version and Hardware firmware. To display the device’s Networking status(LAN Port),such as Port Type(which could be DHCP/Static/PPPoE), Link Status, IP Address, Subnet Mask, Gateway, Primary DNS server, Secondary DNS server.
Sections SIP Account SIP Server 1 SIP Server 2 Description To display and configure the specific Account settings. Status: To display register result. Display Label: Which is displayed on the phone’s LCD screen. Display Name: Which is sent to the other call party for displaying. Register Name: Allocated by SIP server provider, used for authentication. User Name: Allocated by your SIP server provide, used for authentication. Password: Used for authorization.
Outbound Proxy Server Transport Type 7.4 1. To display and configure Outbound Proxy server settings. An outbound proxy server is used to receive all initiating request messages and route them to the designated SIP server. Note: If configured, all SIP request messages from the IP phone will be sent to the outbound proxy server forcefully. To display and configure Transport type for SIP message UDP: UDP is an unreliable but very efficient transport layer protocol.
2. Filled the corresponding parameters you need. Sections SIP Account Codecs DTMF Description To display current Account settings or to select which account to display. To display and configure available/unavailable codecs list. Codec means coder-decoder which is used to transfer analog signal to digital signal or vice versa. Familiar codecs are PCMU(G711U), PCMA(G711A), G722 (wid-bandth codecs),G729 and so on. To display and configure DTMF settings.
Call Session Timer User Agent DTMF Payload: To configure payload type for DTMF. Note: By default, DTMF type is RFC2833 which is the standard. Type Inband uses inband frequency to indicate DTMF tone which is most used to be compatible to traditional telephone server. Type Info use SIP Info message to indicate DTMF message. To display and configure call-related features. Max Local SIP Port: To configure maximum local sip port for designated account.
7.5 1. 2. Network ->Advanced Click Network->Advanced Filled the corresponding parameters you need. Sections Local RTP 7.6 1. 2. Description To display and configure Local RTP settings. Max RTP Port: Determine the maximum port that RTP stream can use. Min RTP Port: Determine the minimum port that RTP stream can use. Phone ->Call Feature Click Phone->Call Feature Filled the corresponding parameters you need.
Sections Forward Transfer Call Waiting Description To display and configure Forward setting. Note: There are three types of forward: Always Forward, Busy Forward and No answer Forward. Always Forward: Any incoming call will be forwarded in any situation. Busy Forward: An incoming call will be forwarded if IP phone is busy. No answer Forward: An incoming call will be forwarded if it’s no answer after a specific time. To enable or disable Call Waiting.
DND Intercom Others 7.7 Call Waiting Enable: If enabled, it allows IP phones to receive a new incoming call when there is already an active call. Call Waiting Tone: If enabled, it allows IP phones to play the call waiting tone to the waiting callee. DND(Do Not Disturb) allows IP phones to ignore any incoming calls. Return Code when DND: Determine what response code should be sent back to server when there is an incoming call if DND on.
Sections Firmware version Hardware Version Upgrade 7.8 1. 2. Description To display firmware version, firmware version starts with MODEL name. To display Hardware version. To select upgrading rom file from local or a remote server automatically. Note: Please make sure it’s right file format for right model. Upgrade->Advanced Click Upgrade->Advanced Filled the corresponding parameters you need.
Sections PNP Option Manual Update Server Description To display and configure PNP setting for Auto Provisioning. PNP: Plug and Play, once PNP is enabled, the phone will send SIP subscription message to PNP server automatically to get Auto Provisioning server’s address. By default, this SIP message is sent to multicast address 224.0.1.75(PNP server address by standard). To display and configure manual update server’s settings. URL: Auto provisioning server address.
AutoP System Log 7.9 To display and configure Auto Provisioning mode settings. This Auto Provisioning mode is actually self-explanatory. For example, mode “Power on” means IP phone will go to do Provisioning every time it powers on. To display syslog level and export syslog file. Syslog level: From level 0~7.The higher level means the more specific syslog is saved to a temporary file. By default, it’s level 3. Export Log: Click to export temporary syslog file to local PC. Security->Basic 1.
