User manual

16
->SETTINGS-> ->Wireless & Networks-> Ethernet->Use static IP.
 Mode 4: In the main screen,tap ->Network Settings->LAN
Connecting->Static IP.
Configuration page is shown as below：
Configuration parameter specification：
Parameter
Specification
IP address
set the IP address of the device
Subnet Mask
set the subnet mask of the device
Default Gateway
set the default gateway
DNS Server
set the DNS address
Alternative DNS Server
set the backup DNS address
3.2.2 Configuring DHCP
You can select one of the following methods to enter the DHCP configuration:
 Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System
Settings-> Wireless & Networks-> Ethernet- >uncheck Using static IP.
 Mode 2: In the main screen, tap -> Settings-> Wireless & Networks->
Ethernet -> uncheck Using static IP.