Operating Instructions and Installation Instructions

Annex
70
External line signalling
deactivated.
Activate external line signalling
(see page 33)
Telephone system cannot be
programmed via programming
telephone 21.
Programming telephone set to
automatic external line access.
All code numbers will be sent to
the external line and not to your
telephone system.
After picking up the handset
press the

key to switch to
internal and then dial the code
numbers for the setting needed.
Please listen for the acknowledge
signal.
Dialling an external number gets
interrupted.
Long distance call authorisation
deactivated or digit blocking
activated.
Activate dialling authorisation
(see page 37)
You forgot your PC configuration
password.
Rest telephone system and enter
new configuration (see page 53)
Basic settings of the telephone system
Settings internal functions
Speed dial authorisation all on
'Do not disturb', selectable all on
'Do not disturb', activated all off
Pickup allowed all on
Make person call all on
Take person call all on
Call waiting all on
Room monitoring, calling allowed all off
CLIP transmission FSK all on
DTMF dialling during internal call all on
Deflections No deflections
Extension names empty
Settings external lines
External line1 going day/night all on/all on
External line2 going day/night all on/all on
External line1 incoming day/night all on/all on
External line1 incoming delayed day/night all on/all on
External line2 incoming day/night all on/all on
External line2 incoming delayed day/night all on/all on
Priority for external calls alternating ext. 1/ext. 2
Delay time 15 seconds
Forwarding authorisation external-external all off
Automatic external line access all off
Device connection (only a single device) empty
SMS connection external line 1 empty
SMS connection external line 2 empty
Fax switch off