User’s Manual (en) ISDN Comfort Phone tiptel 2020 in addition with CTI, USB, and answering machine tiptel 2030 tiptel
Table of contents Illustration Illustration (upper housing, key pad) . . . . . . . . . . .4 Illustration (underneath) . . . . . . . . . . . . . . . . . . . . .5 Initial operation Scope of supply . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 ISDN connection . . . . . . . . . . . . . . . . . . . . . . . . . .8 Emergency operation . . . . . . . . . . . . .
Illustration (upper housing, key pad) Delete Main menu Escape Volume adjustment Telephone book Mute 2-line operation/hold Redial Loudspeaker/ Hands-free mode Speed dialling keys/macro keys Cursor key up ICM log (only tiptel 2030) Call list Answering machine (only tiptel 2030) Cursor key left Enter Cursor key down Cursor key right 4
Illustration (underneath) Connection USB Connection ISDN LINE USB Emergency power I feeding Connection handset 5 O
Initial operation Scope of supply Your telephone scope of supply comprises: m a telephone handset m a supporting stand m a spiral cable m an ISDN connection cable m m m m operating instructions an interface cable USB* the Windows software "tiptel 2030" for Windows® * the TAPI driver "tiptel phone 1" * * only tiptel 2030 Mounting To use the phone as a table top unit, please mount the enclosed supporting stand as shown below.
Initial operation For wall mounting mount the supporting stand with two screws to a wall as shown below (Picture 1). Then mount the phone as shown to the supporting stand (Picture 2). Pull out the handset hanger from the handset cradle, take it upside down and re-insert it (Picture 3).
Initial operation Connection Your tiptel telephone is designed for the connection at Euro ISDN point-to-multipoint connections. Before taking the device into operation, all required connecting cables have to be plugged in. To do this, turn the device so that the inputs under the telephone are easily accessible: m Plug the long end of the curled handset cable in the jack. The small end of the cable has to be plugged in the corresponding receptacle of the handset.
Button functions Use the cursor keys up/down to open the electronic telephone book. When you are in the data entry mode, you can delete a character or number by the q button and insert a character or number by the p button. Use the cursor keys left/right to select functions or menu levels. You can also position the cursor when you are in the data entry mode. The Ok button serves to confirm an entry or a selected function.
Operational hints Entering the MSNs Your ISDN connection and thus your telephone can be addressed via one or more telephone numbers (MSNs = multiple subscriber numbers). (These numbers are obtainable at your local telephone network provider.) Up to 6 telephone numbers can be assigned to your telephone. Press the c button. Press the n or o button to select "settings". The main menu will pop up. 2. 3. Press the q button. The display shows "appointments" "answering machine" (only tiptel 2030). 4.
Operational hints Adjusting the volume When executing a function with activated loudspeaker, you can adjust the volume to your needs. The display shows the selected volume level. Volume zzzzzzzz If the volume remains unchanged after 2 seconds, the telephone automatically resumes the earlier displayed volume. 1. Each actuation will increase/decrease the volume by one step. Press the a button.
5 Settings 4 Resume a parked call (Place call on hold) 3 Dictate / information* 2 Recordings/ Incoming messages* 1 Call list 1st level 3 Time control 2 Appointments 1 Answering machine* 2nd level 1 Enter time 2 Activate time control 4 Message transfer 3 Remote interrogation 2 Answering machine set-up 1 Outgoing message 3rd level Remote answer mode Remote erase Toll saver Remote interrogation code 5 VIP code 6 Message code 1 2 3 4 4th level 5th level You can access the programming men
* only tiptel 2030 2 Memory 7 Call-back list 3 Calls 1 Charges 6 Information 7 Macro 6 Call transfer 5 Telephone 4 System 3 Restrictions 2 Subscriber dialling 1 Ringing tone Time / date Contrast PIN Charge rate Access to the public exchange 7 Factory pre-set 8 Load new software 2 3 4 5 6 1 ISDN MSN Outgoing MSN Call number display Call waiting ECT Call diversion Menu/register Numeric keypad Dialling restrictions Restricted numbers list 5 Released number 1 2 3 4 1 Number entry 2 Contro
Telephone calls Call counter The telephone has an integrated call counter displaying the number of incoming telephone calls. Sa 14.07.2012 12:30 2 calls The call counter is erased automatically: - when you pick up the handset - when you check the call list Direct manual call Pick up the handset and dial the telephone number to initiate the dialling process. After entering the last digit of the telephone number, all further numbers are sent as dual tone multi-frequency signals (DTMF).
Telephone calls Off-line call preparation (indirect call) As for the off-line call preparation, the telephone number is dialled first. Here, you have the option to check the number and to correct it if necessary. 021024280 Please dial 1. Enter telephone number The telephone number is shown in the display. You can erase the last entry by pressing the d button. 2. Pick up the handset The dialled telephone number is called.
Telephone calls Redial The 20 telephone numbers dialled last are stored automatically and can be redialled if desired. The telephone number dialled last is always positioned as the first entry in the list. If you wish to call the telephone number dialled last, just pick up the handset and press the w button afterwards. Mo 09.07.2012 07:24 1: 021024280 1. Press the w button. The display shows the redialling memory. 2. Press the n or o button.
Telephone calls Automatic call-back on busy (CCBS) Should the desired target subscriber's line be busy, the display shows a selection field for automatic redialling and the automatic call-back function, i. e. the function completion of call to busy subscriber. This special feature needs to be released by your telephone network provider. This is not only valid for your installation, but also for the target subscriber's installation. Just replace the handset if you do not wish to use this function.
Telephone calls Automatic redial Should the desired target subscriber's line be busy, the display shows a selection field for the automatic redial or the automatic call-back function (CCBS). Select the automatic redial function so that your telephone continues to dial the chosen telephone number. 1. 2. Press the n or o button in order to select the "redial" function. Press the f button and replace the handset. Every time you press the button, the display switches between the available functions.
Telephone calls Switching between handset and hands-free operation You are holding a telephone conversation using the handset and want to switch to the handsfree operation: 1. Press the f button and keep it pressed. 2. Replace the handset. 3. Release the f button The hands-free mode is activated. 1. Pick up the handset. The hands-free mode is deactivated and you can continue holding your telephone conversation via the handset.
Telephone calls Mute function When holding a telephone conversation you can make a confidential enquiry in the room without allowing your telephone partner to listen to what is spoken. 1. Press the m button. The symbol "mute" is displayed. The handset microphone and the hands-free microphone are deactivated. You can now make your enquiry in the room. 2. Press the m button again. The handset and the hands-free microphone are activated again. You can continue with the telephone conversation.
Telephone calls Call tracing (malicious call identification) (This feature must be released by your local telephone network provider.) If you are bothered by an unknown caller and want to identify the calling party, you have the option to do so even when the corresponding telephone number is not being transferred and shown in the display. 1. 2. Press the n or o button in order to select the function "malicious call identification (MCI)". Press the f button.
Telephone calls 2-line operation with hold The function "2-line operation with hold" allows you to switch between an active connection and a call placed on hold. 1. Press the r button. The active call is placed on hold and the call placed on hold is activated. Three-party conference (This feature must be released by your local telephone network provider.) If you intend to establish a call with two parties at the same time, you need to establish an active call and place one caller on hold. 1.
Telephone calls Call transfer (continued) You are holding a telephone conversation and want to answer and transfer a second incoming call: The call is being placed on hold. The connec1. Press the r button. tion to the party issuing a call waiting signal is activated. 2. 3. 4. Press the n or o button to select the function "call transfer". Press the f button. Every time you press the button, the display switches between the available functions. Dial desired extension number for call transfer.
Telephone calls Call waiting You are holding a telephone conversation while another party is trying to call you. This is indicated by a call waiting signal (two short tones). In addition, the telephone number issuing a call waiting signal is displayed. Use the arrow buttons to select the desired function or answer the second call directly by pressing the r button. You are holding a telephone conversation and receive another incoming call: You want to answer the second incoming call: 1. Press the r button.
Telephone calls Answering a call You receive an incoming call. Your telephone rings. The display shows the following information: - Name or Telephone number or Analog network or Number presentation restricted. Call 02102 428 You want to answer the incoming call: 1. You are connected to the caller and can start your telephone conversation. Pick-up the handset. You want to reject the incoming call: 1. Press the b button. Your telephone resumes the normal state.
Telephone calls Keypad In some exchange offices, the programming of special features (e. g. call forwarding) is effected via the "Keypad protocol". The programming is done via the numeric keys and the buttons * and #. Here, macro programming is provided to assign the keypad function to a speed dialling station (see chapter "Macro programming"). The possible keypad functions are given by your telephone network provider. 1. Pick-up the handset. The display shows "please dial". 2.
Telephone calls Call list The call list provides you with information on the last 20 incoming calls, such as date and time of the call, called multiple subscriber number and the corresponding telephone number of the calling party. If the telephone number was transferred and presented and if this number is stored in the electronic telephone book, the name of the corresponding subscriber is shown instead of the telephone number.
Electronic telephone book General information on the electronic telephone book The electronic telephone book manages names and telephone numbers of your telephone partners and thus becomes your personal telephone manager. The electronic telephone book can store and manage up to 100 entries. You have the option to activate a cost counter and different filter functions per entry.
Electronic telephone book Storing data An entry in the electronic telephone book consists of the name (= search criterion), the telephone number and additional settings if required (e. g. filter function, cost counter). 1. 2. 3. 4. 5. 6. Press the Press the Press the Enter the pad. Press the The phone register will open. The display shows "new entry". The display shows "name". Your entry is displayed. The character entered last can be erased by pressing the button. The name is now entered.
Electronic telephone book Editing data Entries in the electronic telephone book can be checked, corrected or erased at any time. Press the e button. Press the q button. The phone register will open. 3. Press the q or p button to select an entry. Use these buttons to browse through the electronic telephone book until the desired entry (name) is displayed. 4. Press the f button. The display shows "edit entry". 1. 2. The first entry of the electronic telephone book is shown in the display.
System settings Entering the MSNs Your ISDN connection and thus your telephone can be addressed via one or more telephone numbers (MSNs = multiple subscriber numbers). (These numbers are obtainable at your local telephone network provider.) Up to 6 telephone numbers can be assigned to your telephone. The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4. Press the n or o button to select "system". The display shows "system". 5.
System settings Call number display You have the option to activate or deactivate the call number display for outgoing or incoming calls. The selected option becomes valid for all entered MSNs. The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4. Press the n or o button to select "system". The display shows "system". 5. Press the q button. The display shows "ISDN". 6. Press the q button. The display shows "MSN". 7.
System settings Setting the call waiting function If you receive an incoming call while already holding a telephone conversation, you can determine, whether a signal (two short tones) shall be given for this call or not (see also chapter "Call waiting function"). The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4. Press the n or o button to select "system". The display shows "system". 5. Press the q button.
System settings Setting the call transfer function The call transfer function offers you the option to transfer an answered call (see also chapter "Call transfer") to another extension. How this function is being executed technically depends on your telephone system. This is either done via the ISDN feature ECT (explicit call transfer) or another function. If you do not wish to support the explicit call transfer (ECT), you can deactivate this function as follows: Press the c button.
System settings Internal ISDN features (only tiptel 2030) The ISDN features "hold", "2-line operation with hold", "three-party conference" and "call forwarding" are features provided by your exchange office and programmable via the telephone. Here, you also have the option to have these features executed by your telephone with no need to have them released by the exchange office.
System settings Setting time and date The time and date are automatically set when an outgoing call is made. In addition, you have the option to set time and date manually. The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4. Press the n or o button to select "system". The display shows "system". 5. Press the q button. The display shows "ISDN". 6. Press the n or o button to select "time/date". Press the f button.
System settings Changing the PIN You need a PIN (personal identification number) to activate or deactivate call or dialling restrictions (in the factory pre-set, the PIN is 000). 1. 2. 3. The main menu will pop up. Press the c button. Press the n or o button to select "settings". Press the q button. Every time you press the button, the display switches between the available functions. The display shows "appointments" or "answering machine" (only tiptel 2030). Press the n or o button to select "system".
System settings Factory pre-set You can resume the factory pre-set parameters at any time. 1. 2. 3. 4. 5. 6. 7. Press the c button. Press the n or o button to select "settings". Press the q button. The main menu will pop up. Press the n or o button to select "system". Press the f button. Press the n or o button. Press the f button. The display shows "system". Every time you press the button, the display switches between the available functions.
System settings If necessary you can update the operating software on the telephone. This is possible via ISDN line from our update server or via the USB port of the telephone from your local PC (only tiptel 2030). Before using the ISDN update unplug the USB cable. Update via ISDN Press the c button. Press the n or o button to select "settings". Press the q button. The main menu will pop up. 4. Press the n or o button to select "system". The display shows "system". 5. Press the q button.
System settings Note: If, after dialling the number, the display shows "You already have the current version" no update is required and the device returns to standby mode.If the connection to the server is broken during the update, the display shows "Update interrupted" and the device returns to the "Update via ISDN" menu option. Start again at Point 7 (see above). All the settings and incoming messages are usually maintained after updating.
Telephone settings Ringing tone The ringing tone can be adjusted individually with regards to volume, melody and speed. You can assign an individual ringing tone to each entered MSN. If you do not wish to be disturbed by incoming calls, just deactivate the ringing tone. If you want the volume to increase by each ringing tone, you can activate the function "incremental volume control". The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button.
Telephone settings Direct dialling (baby call) The function "direct dialling" (or baby call) allows the automatic dialling of a pre-programmed subscriber number by just pressing any key (except for the menu buttons) or by picking up the handset. The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4. Press the n or o button to select "telephone". The display shows "telephone". 5. Press the q button. The display shows "ringing tone".
Telephone settings Call blocking / keypad locks You have the option to lock different buttons (e. g. the numeric keypad or access to the menu or electronic telephone book). Locked buttons or dialling restrictions will only get accessible after entering the PIN. The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4. Press the n or o button to select "telephone". The display shows "telephone". 5. Press the q button.
Telephone settings Call restrictions / keypad locks (continued) Menu / register: 10. Press the n or o button. Every time you press the button, the display switches between: on: The function is activated. off: the function is deactivated. The setting is saved. 11. Press the f button. Numeric keypad: 10. Press the n or o button. Every time you press the button, the display switches between: on: The function is activated. off: the function is deactivated. The setting is saved. 11. Press the f button.
Appointments Enter/edit appointments The telephone can manage 30 different - one-time or daily recurring - appointments. In addition, it will remind you of an entered appointment by a signal tone right at the entered start time. The appointment list allows you to view all entered appointments and to select them for editing. In order to enter a new appointment, just select the entry "new entry". 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4.
Time control Enter/edit time control data Via time control you can control call deflection and/or answering machine. A maximum of 10 entries is possible. You can enter the valid day of the week for each entry. In order to make a new entry, just select the first item "new entry". The entire time control function can be activated or deactivated via the menu item "time control". If time control data exist, the display indicates this via the symbol in the normal state.
Time control Enter/edit time control data (continued) 14. Press the f button to select the time control switching function. 15. Press the q or p button to activate or deactivate call deflection and/or answering machine. 16. Press the f button. The display switches between "ON" and "OFF". The entry is saved. Editing: 10. Press the f button. 11. Now, enter your changes. 12. Press the f button. The changes are saved. Erasing: 10. Press the n or o button to select "delete entry". 11. Press the f button.
Information Charges (This feature needs to be released by your telephone network provider) The charge counter shows the total of all telephone charges for the corresponding MSN accumulated since the last reset of the charge counter. In addition, you can check the accumulated charges for the entire connection (even the charges incurred for other terminals at your S0 bus). Press the c button. Press the n or o button to select "information". The main menu will pop up. Press the q button. Press the f button.
Information Press the c button. Press the n or o button to select "information". The main menu will pop up. 3. Press the q button. The display shows "charges". 4. Press the n or o button to select "memory". Press the f button. The display shows "memory". The display switches between the voice memory and the telephone book. 7. Press the n or o button to select text memory or voice memory (only tiptel 2030). Press the f button. 8. Press the f button. The memory is being erased. 1. 2. 5. 6.
Macro programming Macro programming Via the macro programming, you have the option to assign function or telephone numbers to the 14 speed dialling stations of your telephone. This allows you to execute frequently used settings or functions during a call. Some of the speed dialling stations are already pre-assigned and labelled accordingly. The main menu will pop up. 2. Press the c button. Press the n or o button to select "settings". 3. Press the q button. 4.
Call forwarding Call forwarding The call forwarding function allows you to forward an incoming call for your telephone number to another extension or subscriber. The call forwarding can be individually pre-set for each MSN. In the normal state, press the f button to activate this function. Whether the call forwarding is activated or not is indicated via a red LED and in addition to that, the display shows "call forwarding". You can deactivate the call forwarding function by pressing the f button again.
Call forwarding Call forwarding (continued) 8. Press the n or o button. The display switches between the individual call forwarding options, i. e. unconditional, on busy, on no reply, answering mode and off: unconditional: All incoming calls are directly forwarded to the programmed target telephone number. on busy: An incoming call is only forwarded to the programmed target telephone number if your line is busy. on no reply: An incoming call is forwarded if it is not answered within 15 seconds.
Answering machine (only tiptel 2030) Answering mode The answering mode and the call forwarding function are activated or deactivated (corresponding to the pre-set parameters) by pressing the f button. The display shows the call counter, the counter for incoming messages and the LED positioned above the f button is lit. The call counter is set to 00. In addition, incoming messages are indicated by the blinking LED. A programmed call forwarding function always has priority. Sa 16.06.
Answering machine (only tiptel 2030) Answering machine set-up (continued) Select outgoing message (OGM): Here, you determine which outgoing message shall be used. 11. Enter a number between 1 and 7 via the numeric keypad to specify the desired OGM. Call delay: 11. Enter a duration between 1 second and 50 seconds via the numeric keypad. Here, you define the time after which the answering machine shall answer an incoming call. Call screening: 11. Press the n or o button.
Answering machine (only tiptel 2030) Outgoing messages Your tiptel 2030 offers you the option to record 6 individual outgoing messages. When using the additional outgoing message from the factory pre-set you can activate the answer mode immediately - without the necessity to record an OGM before (plug & answer). 1. 2. 3. 4. 5. 6. The main menu will pop up. Press the c button. Press the n or o button to select "settings". Press the q button. Press the q button. Press the f button.
Answering machine (only tiptel 2030) Incoming messages You can play-back and erase individual messages from the voice memory. Sa 16.06.12 08:30 ICM 1 1. 2. The recording menu will pop up. Press the g button. Press the f button. The display shows time and date of the first new incoming message. Play-back incoming message: 3. Press the p button or press the f button. The play-back mode is started and the device plays back one message after the other. Repeat: 3. Press the q button.
Answering machine (only tiptel 2030) Dictate/Call record You can use your answering machine to dictate personal information directly. If you speak your information while the answering mode is on, other persons can retrieve this information via a remote interrogation function. In this way, your answering machine can serve as an electronic mailbox. The main menu will pop up. 3. Press the c button. Press the n or o button to select "dictate/call record". Press the f button. 4. Press the b button.
Answering machine (only tiptel 2030) Message transfer settings In the case of a message transfer, recorded incoming messages are transferred to a programmed telephone number. Here, you can make out all settings the device needs to perform a message transfer. Please be aware that you also need to activate the remote interrogation in order to use this function. Press the c button. Press the n or o button to select "settings". The main menu will pop up. 2. 3. Press the q button.
Remote control (only tiptel 2030) Perform remote interrogation 1. Call your answering machine and wait until the announcement starts. 2. Switch your telephone to the tone dialling mode (if necessary) or use a regular remote beeper and hold the acoustic aperture against the microphone of the handset. 3. Dial your remote control code that you set earlier at your tiptel 2030 (1 - 4 numeric digits). Each of the entered code digits is acknowledged separately by a voice message.
Remote control (only tiptel 2030) Remote activation of the answering mode If you forgot to switch on the answering mode, you can do this remotely. Just call your tiptel 2030. After about 50 seconds the device picks up and you will hear a signal tone. Now, please enter your personal remote control code. If the remote control code was identified, the selected outgoing message is played back for control purposes. The device can now be operated remotely.
Remote control (only tiptel 2030) Remote control functions Button Function Remark/operation 1 Room monitoring Room monitoring: The microphone of your telephone is turned on and you can listen to what is happening in the surroundings of the device. 2 Remote interrogation of new messages The answering machine plays back all new messages that have been recorded since your last remote interrogation. When all messages have been played back, you will hear the voice message "end of messages".
Remote control (only tiptel 2030) Remote control functions (continued) Button Function Remark/operation * Remaining recording capacity The remaining recording capacity is informed by a voice message. *4 *5 Message transfer on/off You can switch the message transfer on or off. Change telephone number Allows to change the target telephone number for the message transfer function. Dial the new destination number. The device confirms each number separately.
Remote control (only tiptel 2030) Remote control settings Here, you have the option to set-up the remote interrogation function according to your individual needs. 1. 2. Press the c button. Press the n or o button to select "settings". The main menu will pop up. Every time you press the button, the display switches between the available functions. 3. Press the q button. The display shows "answering machine". 4. Press the q button. The display shows "outgoing message". 5.
Remote control (only tiptel 2030) Remote control settings (continued) Remote erase: 9. When pressing the n or o button, the display switches between on and off. Your selection is shown in the display. on: Recorded incoming messages can be erased during a remote interrogation. off: Recorded incoming messages cannot be erased during a remote interrogation. Remote pre-interrogation free of charge: 9. When pressing the n or o button, the display switches between on and off.
PC connection (only tiptel 2030) PC connection The tiptel 2030 comes with an USB interface to be connected with the pC. Via the USB connection the software tiptel 2030 and the TAPI driver can be used. Software tiptel 2030 The software "tiptel 2030" from the scope of supply enhances the functional scope of your tiptel 2030, e. g. by the options: m Loading and saving the call number memory m Call data management m Change of settings and others m Loading a new operating software.
Appendix Service You have purchased a modern product by Tiptel which was designed and manufactured in Ratingen near Düsseldorf. The high-tech manufacturing facilities "Made in Germany" grant a continuous level of the highest quality. This is even underlined by the certification according to DIN EN ISO 9001. Guarantee Please contact your local dealer or importer for details of guarantee for non EC countries.
Appendix CE sign This device is approved for the connection and use within the analogue public telephone networks in all EC countries — according to the European Requirements. Due to technical deviations in individual countries, we cannot grant an unlimited guarantee for the successful operation at all types of telephone accesses. Tiptel hereby declares that the device complies with all fundamental requirements of the European directive 1999/5/EC. This conformity is confirmed by the CE sign on the device.
Important information Operation during power failure Even in the case of a power failure, the basic telephone functions remain executable (manual dialling and ringing signal for incoming calls, see chapter "Emergency operation"). Cleaning Use a soft, slightly moist cloth for the housing surface. Please do not use abrasive liquids or chemicals to clean the device. The telephone is maintenance-free.
Factory pre-set Telephone settings Direct call: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .None Ringing tone Melody: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Triadic (66) Incremental volume control: . . . . . . . . . . . . . . . . . .Off Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Medium Restrictions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .None System settings MSN: . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting Problem Possible error source Recommendation No dialling tone after picking up the handset. Connecting cable, handset's cable, ISDN wall socket Check all cables, check telephone wall socket by using another telephone. PIN code forgotten. The maximum number of entries in the electronic telephone book is reached. Contact our customer service. "Memory capacity exhausted" is displayed. Call filter active; do not disturb function on, not all MSNs registered. Call forwarding active.
Technical data Power supply: SO-fed, emergency power supply possible Display: Resolution: Contrast: 2 x 20 characters (alphanumeric) 20 levels Connecting cables: Telephone connection cable: Data cable USB: Handset cable Length = 3 m Length = 3 m, 9-pin, sub socket strip Length = max. 1.8, curled cable Answering machine (only tiptel 2030): Outgoing messages: Recording capacity: Number of incoming messages: Data retention during power failure: 6 individual, 1 pre-recorded About 50 minutes Max.
Tiptel.com GmbH Business Solutions Halskestraße 1 40880 Ratingen Germany Tel.: 0900 100 – 84 78 35* Vanity Tel.: 0900 100 – TIPTEL* Internet: www.tiptel.de International: Internet: www.tiptel.com *(1,49 Euro/Min. aus dem Festnetz der Deutschen Telekom, abweichende Mobilfunkpreise möglich) Tiptel GmbH Ricoweg 30/B1 2351 Wiener Neudorf Austria Tel.: 02236/677 464-0 Fax: 02236/677 464-22 E-mail: office@tiptel.at Internet: www.tiptel.at Tiptel AG Bahnstrasse 46 8105 Regensdorf Switzerland Tel.
