Operation Manual

Telephone calls

Automatic call-back on busy (CCBS)

Should the desired target subscriber's line be busy, the display shows a selection field for auto-

matic redialling and the automatic call-back function, i. e. the function completion of call to busy

subscriber. This special feature needs to be released by your telephone network provider. This

is not only valid for your installation, but also for the target subscriber's installation. Just replace

the handset if you do not wish to use this function. The corresponding menu line is only shown

in the display if the CCBS feature is available.

subscriber busy

call-back

1. Press the  or  button in order to

select the "call-back" function.

2. Press the  button and replace the

handset.

3. Wait for signal tone.

4. Pick up the handset.

Edit call-back list

In the idle state:

1. Press the  or  button in order to

select the "call-back" function.

2. Press the  button.

3. Press the  or  button.

4. Press the  button

4. Interrupt the transaction by pressing

 .

Every time you press the button, the display

switches between the available functions.

The display resumes the normal state. The

call-back request is stored in the call-back

list.

As soon as the target subscriber's line is free

again, a signal tone is heard.

After picking up the handset, you hear a rin-

ging tone and the target subscriber's telepho-

ne rings.

Every time you press the button, the display

switches between the available functions.

The call-back list is displayed.

These buttons allow to browse through the

call-back list until you found the desired tele-

phone number or name.

The entry is erased from the call-back list.

You have activated different call-back requests (6 as a maximum) and now intend to erase some

of those.

021024280

call-back - delete?