Operation Manual

60
Remote control functions
Button Function Remark/operation
 Room monitoring Room monitoring: The microphone of your telephone
is turned on and you can listen to what is happening in the
surroundings of the device.
 Remote interrogation The answering machine plays back all new messages that
of new messages have been recorded since your last remote interrogation.
When all messages have been played back, you will hear
the voice message "end of messages".
Remote interrogation The answering machine plays back all messages that have
of all messages been recorded since the answering mode was activated.
 Next MSN Allows a remote interrogation for further MSNs. Dial the
+ number of the corresponding MSN (1 ... 6). The device
MSN acknowledges the number. All further remote interrogati-
ons will now refer to this MSN.
 Play-back The play-back is started at the current position.
 Other OGM Allows you to select another outgoing message. Dial the
desired OGM number (1 - 7). The device acknowledges
OGM the OGM number and plays it back for verification purposes.
 Stop The current function stops.
 Change OGM Allows you to record a new OGM during the remote ope-
+ ration. Dial the OGM number (1 - 6). The device acknow-
OGM ledges the OGM number. Start recording the new OGM via
the mouthpiece of the handset. Should this be an OGM
without incoming recording, press "8" (stop). Should this
be an OGM with incoming recording, press "#". You can
also record a final message if desired. After having spoken
the final message just press "#" again. The device plays
the complete OGM back for verification purposes. You can
now replace the handset. The answering machine will now
play back the new OGM when answering calls.
 Secondary function Pressing this button allows you to access a secondary
on/off function.
 +1 Hands-free mode The hands-free mode is activated.
 +2 Room signal This creates a room signal (beep) via the loudspeaker.
This function corresponds to the VIP function. The room
signal is heard 60 seconds and is stopped automatically
afterwards.
Remote control (only tiptel 291/293)