Operation Manual

Outgoing messages

Recording an outgoing message

Select the desired OGM using the

selection button next to the OGM

symbol. Prior pressing of

allows you to browse in reverse.

The selected OGM is displayed next to

he symbol on the bottom right of the

display.



Press and hold OGM. Wait, you will hear a short tone, a micro-

phone is displayed to signal ongoing in-

coming message.

Start speaking (maintain approx. 5

cm distance from the microphone).

The display shows the time that you have

been speaking.



Release OGM to interrupt recording. "With incoming message" and "Without

incoming message" is displayed.



To continue the recording press and

hold OGM again.

The recording continues.

To cancel the recording press stop. The recording is cancelled.

Using the selection button next to

he relevant line select whether the

OGM should provide the option of

leaving an incoming message or

not.

The OGM is completed and is played

back for verification purposes. If the

OGM gives the option of recording and

ICM you will hear a beep at the end. If the

OGM does not give the option of record-

ing you will hear two beeps at the end.

 If you record OGM 5 without the option to record (OGM only) when the in-

coming message memory is full your tiptel 540 SD switches to this OGM

automatically.