Operation Manual

Answering mode
20
Answering mode

Make sure that there is enough memory for new messages (max. 999). You
may need to change the memory card or delete messages.
If required select the OGM using the
selection button next to the OGM
symbol.
The selected OGM is displayed next to
t
he symbol on the bottom right of the
display. The symbol flashes if the OGM
has not been recorded or has been delet-
ed.
Press answering mode. The LED in the answering mode button
lights up. For OGMs "without the option
t
o record" a telephone with the number of
calls is displayed. For OGMs "with the
option to record" in addition the number
of incoming messages is shown in large
digits to the right of the telephone.
If the caller's number is transferred dur-
ing a call the display changes and the
call number is displayed. If the telephone
number matches one from the telephone
book, the caller's name is displayed.
The volume can be set using the
control buttons (left/right).
Incoming messages can be screened.
Y
ou can accept the call at any time by
lifting the telephone receiver. The play-
back button flashes if you have new, un-
read messages.