Operation Manual
Remote access
44
Switching function
To switch message transfer on/off
Press * and 4 in succession.
The current status "on" or "off" is an-
nounced.
To switch timer on/off
Press * and 3 in succession.
The current status "on" or "off" is an-
nounced.
...
To change the OGM
Press 7 and the desired OGM 1 … in
succession
The selected outgoing message is played
back for checking. The next caller is greet-
ed with this message.
Changing the OGMs function
...
To change the OGM
Press 9 and the desired OGM 1 … in
succession
The tiptel 540 SD asks you to speak.
Record an outgoing message.
For an outgoing message with incom-
ing message option: After recording
t
he OGM press 8.
The OGM is played back for checking. At
t
he end you hear one signal tone.
or
For an OGM without incoming message
option (OGM only):
After recording the OGM press #.
The OGM is played back for checking. At
t
he end you hear two signal tones.
The message is played back again for checking after you change or modify it.
Your tiptel 540 SD will then ask whether you are still on the line with the
"Please quit" voice message. You must respond to this quit request within 8
seconds by pressing any key otherwise the device breaks the connection.