Operation Manual

Remote access
45
Message transfer function
 
Changing the 1st call number for
message transfer (only the first num-
ber can be changed)
Press * and 9 in succession.
The first current call number is announced.
Next comes the request to enter a new call
number.
Enter new call number.
For special symbols press the following
buttons in succession:
Each digit is confirmed.
  = Wait for dial tone / 3 Sec. pause
  = Flash (short)
  = Internal
  = Hook flash (long)
  = S (send by SMS)
  = *
 
To delete the call number
Press * and 7 in succession.
The call number is deleted.
 
To accept the call number
Press * and 8 in succession.
The new call number is played back for
checking.
Call forwarding function
 
Activating call forwarding
Press * and 1 in succession
The current target call number is an-
nounced. Next comes the request to enter
a new target call number.
Enter the new target call number.
For special symbols press the following
buttons in succession:
Each digit is confirmed.
  = Wait for dial tone / 3 Sec. pause
  = Flash (short)
  = Internal
  = Hook flash (long)
  = *
 
To delete the target call number
Press * and 7 in succession.
The target call number is deleted.