Operation Manual

Settings
85
When entering digits press the se-
lection button next to the desired
line.
The entry location flashes.
Change the settings using the con-
t
rol buttons (up/down).
The display counts up or down.
For settings with several digits
move the entry location to the re-
quired location using the control
buttons (left/right).
The selected entry location flashes.
To end digit entry press the selec-
t
ion button next to the desired line
again.
The entry location stops flashing.
To stop the entry press stop several
t
imes.
The initial state is again displayed.
Adjusting the volume
You can set the volume when the device is in the initial state.
Set the volume using the control
buttons (left/right).
The volume bar shows the current set-
t
ing.