User guide

Enterprise IP Phone Customizing Your Phone
letter in the new interface, the phone will search the contact in LDAP server which
following the Certain rules, and show it in the LCD, user can choose the contact to call
out.
2. Search the incoming call: the phone will search the local directory when there is a
coming call. If they can’t find the contact in the local directory, it will search them
through LDAP server, and show the contact name in the LCD. The LDAP Lookup For
Incoming Call option can be configured to enable or disable this function via web
interface..
3. The function of Dial-up directory: under the dial interface, each time you press a key
there are inquiring for a number. It will show on the LCD and let the user to choose. The
LDAP Lookup For PreDial/Dial option can be configured to enable or disable this function
via web interface.
To set the LDAP via the Web interface:
1) Choose Contacts->LDAP.
2) Configure the corresponding options
3) Click Confirm to save the change.
Other Settings
Key as Send
Users can set a specific button (“#” or “*”) to active as the send button.
To set the send key via the IP phone interface:
1) Press Menu->Features->Key as Send->Enter to enter the configuration page.
2) Press the Switch hot key to choose a button that you want to use as the send key:
“#”, “*”, or disable this option.
3) Press the Save hot key to save the changes.
To set the send key via the Web interface:
1) Choose Phone-> Features-> Key As Send.
2) Highlight the specific one in the pull-down menu, then click the Confirm button to
save the change.