User guide

Enterprise IP Phone Trouble Shooting
Network Setting
PC Port Setting
Please refer to the previous part “Configuration and Registration” for the basic Network
WAN setting information. The following table lists the instructions of the field about the
Network PC Port Setting.
Field Name Description
As Bridge If you select the Bridge mode, then the two Fast Ethernet ports will
be transparent.
As Router If you select the Router mode, the SIP phone will work as a router
IP address User could configure the PC port IP address.
DHCP Server If you set the DHCP server on, the device connected to the PC port
will get the IP address automatically between the start IP address
and the end IP address. But if you select the bridge mode, the DHCP
server can not work.
Start IP Address Indicate the range of the IP address
End IP Address Indicate the range of the IP address
To configure PC Port settings via Phone interface:
1) Press Menu->Settings->Advanced Settings.
2) Enter the password required, scroll to Network option, then press Enter hot key,
select PC port and press Enter hot key.
3) If you choose Bridge, it will return to the previous menu.
4) If you choose Router, you will be prompted to enter the IP Address, Subnet Mask,
DHCP Server Disable/Enable.
5) Press Save hot key to save the changes, or Cancel hot key to return to the previous
menu.
To configure PC Port settings via Web interface:
Choose Network-> PC Port to do the relating configuration. You can consult your system
administrator for more information.