User guide

Enterprise IP Phone Trouble Shooting
To assign the key as Hot Desking:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
Hot Desking option from the list.
2) In the "Value" field, enter the URL address in the input field to active the advanced
mode. Or you can leave it black to active the base mode.
3) Press Confirm button to save the changes.
LDAP
If you want to use the LDAP function, you must configure the corresponding options in
the LDAP interface at first.
To assign the key as LDAP:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, choose
LDAP from the list.
2) Press Confirm button to save the changes.
3) When you press this key under the idle, the phone will turn to the contact search
interface.
Prefix
When you set up the function of prefix, press this key, the phone will be ready to make
a new call, and show up the content which your set previously on the dail interface. And
you could enter other figure and call out
To assign the key as Prefix:
1) Choose Phone->DSS Key->Memory Key or Line Key, choose one of the keys you
want to make the assignment, there is a pull-down menu in the Type field, and
choose Prefix from the list, and enter the number you want to show up on the dial
interface in the Value field.
2) Press Confirm button to save the changes
Tone Settings
You can define the frequency and time period of all the following tones：
 Dial