Operation Manual

Operating the answering machine

Note: The function answering machine is available only if tiptel VCM-module is

installed.

The installation and configuration of answering machines are described in the

installation manual. The operating of the answering machines can be done from a

local phone by the code

 or by remote access from anywhere in the world

using the keypad on a Dual-tone Multiple Frequency (DTMF) touchtone telephone.

You need a personal access code to access the phone remotely. You can set your

personal remote access code as described in "Settings".

Remote access



Call your personal answering machine.

Internally available under 930 from the

assigned subscriber. Otherwise, call the

subscriber using the extension/direct

dial number.

ou hear the current announcement.

Enter the remote access code via the

elephone keypad. If you make a

mistake delete entry using the * key and

start again.

A voice message confirms recognition of each

digit.



To confirm the entry press the # button. If the correct code is detected your VCM

module 14 notifies you via a voice message. If

he code is incorrect, the device terminates the

connection.

Note: If you have activated the QRC function (refer to “Installation Manual of your

tiptel telephone system”) for the call number from which you are calling, your

personal answering machine answers directly with the voice message. Then you

do not have to enter your remote access code.

Start the desired function by entering the

relevant digit (e.g. Number 2 to playback

all new incoming message).

Each digit is confirmed.



Press digit 8 to end a function. The current function ends.

 

End remote access by pressing star and

hash in succession.