Operation Manual
Subscriber configuration via PC
22
Subscriber configuration via PC
It is also possible to configure the subscriber’s settings via the PC. For this you need
a username, password and to connect a PC equipped with a network connection to
the tiptel TK device.
For the configuration please start your Internet browser and enter the telephone
system’s IP address or the network identifier in the address bar.
The factory settings are "192.168.34.100".
User name and password an a different IP address (when applicable) will be
provided by your system administrator or the person installing your telephone
system.
The configuration in the delivery status (factory settings) is described below.
Example: Subscriber "Analog50" wishes to modify his configuration.
The user name is pre-set to "Analog50". No password is used.