Operation Manual

Subscriber
24
Subscriber
Settings
Automatic exchange connection
After picking up the receiver, the telephone system will automatically perform a
standard exchange connection, i.e. the telephone system imperceptibly dials "0". If a
free CO line is available, you will immediately hear the external dialling tone. If all
external lines assigned to the subscriber are busy, you hear an internal busy tone. An
automatic exchange connection is only executed for the first connection attempt. For
setting up further connections – e.g. for an inquiry call – the internal dialling tone is
heard first. If a further external connection is to be made, the exchange must be
dialled.
If the “automatic exchange connection” feature has been activated, you can dial
“

” for an internal line, or wait for 10 seconds after picking up the receiver until
you hear the internal dialling tone. You can then dial desired extension number.
After 10 seconds, the telephone system automatically switches to the internal
dialling tone.
Automatic exchange connection is also executed if no exchange authorisation is
available. This is necessary in order to ensure that emergency phone numbers can
be dialled. As soon as additional digits that do not belong to an emergency number
are dialled, the connection is terminated.
Requirements: The "automatic exchange connection" feature must be enabled. The
required exchange authorisation must also be available.
Pick-up
Use this menu to define whether an incoming call may be picked up by another
subscriber. Select the “answering machine” setting if you wish to operate an
answering machine at this extension. You are now able to pick up the call even after
it has already been answered by the answering machine.
Follow me
This function allows you to transfer the call forwarding of your internal number to the
phone number where you currently are.
Press the following buttons to realise call forwarding to the other extension:


(individual phone number)
