Operation Manual

Getting started
12
Getting started
Parts supplied
Your tiptel 540 office package contains:
•
tiptel 540 office
•
Telephone connection cable
•
Mains plug 11.5V / 350 mA
•
2 transfer cables pin/pin and pin/cinch
•
Operating instructions with separable brief operating instructions and operating
card for remote control
Installation
Your tiptel 540 office has been produced for normal operating conditions. Solutions
in furniture varnish, cleaning oils or paint cleaners can loosen the base. Bases that
have been altered in this way may leave tracks behind on the furniture.
Therefore use a non-slip underlay especially for new or freshly treated furniture.
Connecting
Before you can use your tiptel 540 office you first need to connect all the necessary
cables.
1 Fit the small connector of the mains plug into the "POWER" jack and the plug
into a 230 V socket outlet.
2 Fit the small connector of the telephone connection cable into the "LINE" jack
and the other connector into the telephone socket.
3 If you want to transfer incoming messages to an external medium fit the trans-
fer cable with the jack plug to the "OUT" socket and the cinch plug to the au-
dio input on the external device (audio system, cassette recorder etc.).