Operation Manual

Outgoing messages

Recording OGMs from an external signal source

You can also record professional outgoing messages via the audio input from an

external signal source (e.g. cassette recorder).

Select the desired OGM using the

selection button next to the OGM

symbol.

The selected OGM is displayed next to the

symbol on the bottom right of the display.

Press secondary function The secondary function symbol is dis-

played.



Press and hold OGM. Wait, you will hear a short tone, a cassette

is displayed to signal an ongoing re-

cording.

Start the playback for the external

signal source.

You can follow the ongoing recording via

the loudspeaker. The display shows the

time that you have already been recorded.



To end the recording release OGM. "With incoming message" and "Without

incoming message" is displayed.

Using the selection button next to the

relevant line select whether the OGM

should provide the option of leaving

an incoming message or not.

The recording is completed and is played

back for verification purposes. If the OGM

gives the option of recording an ICM you

will hear a beep at the end. If the OGM

does not give the option of recording you

will hear two beeps at the end.