Operation Manual

Remote access
40
Switching function
 
To switch message transfer on/off
Press * and 4 in succession.
The current status "on" or "off" is an-
nounced.
 
To switch timer on/off
Press * and 3 in succession.
The current status "on" or "off" is an-
nounced.

 ... 
To change the OGM
Press 7 and the desired OGM 1 … in
succession
The selected outgoing message is played
back for checking. The next caller is greeted
with this message.
Changing the OGMs function

 ... 
To change the OGM
Press 9 and the desired OGM 1 … in
succession
The tiptel 540 office asks you to speak.
Record an outgoing message.

For an outgoing message with incoming
message option: After recording the
OGM press 8.
The OGM is played back for checking. At
the end you hear one
signal tone.
or

For an OGM without
incoming message
option (OGM only):
After recording the OGM press #.
The OGM is played back for checking. At
the end you hear two
signal tones.

The message is played back again for checking after you change or modify it.
Your tiptel 540 office will then ask whether you are still on the line with the
"Please quit" voice message. You must respond to this quit request within 8
seconds by pressing any key otherwise the device breaks the connection.