Operation Manual

Message transfer
59
When entering the call numbers
press the selection button next to
"Call number" and make the desired
settings using the control buttons
(up/down).
The entry location flashes.
Digits and special symbols are displayed.
The special symbols have the following
meanings:
~ = Wait for dial tone / 3 Sec. pause
i = Internal (for PABX)
F = Flash (short, for PABX)
H = Hook flash (long, for PABX)
S = Send by SMS
Press control button (right) to change
to the next entry location and enter
other digits.
The cursor to the next entry location.
Use the control button (left) to move
the cursor once place backwards, for
example to overwrite a character.
The cursor moves to the left.
To transfer a call number from the
telephone book press the selection
button next to the "Insert" symbol.
The call number is entered to the left of the
cursor.

Search and select names as de-
scribed under "Search entries".
The name is displayed below the call
number.
To enter a character press secon-
dary function and then control button
(down).
An empty space is inserted to the left of
the cursor.
To delete a digit, move the cursor to
the location and press the selection
button next to the delete symbol.
The character under the cursor is deleted.
2s
To delete the whole call number
press the selection button next to the
delete symbol for 2 seconds.
The entire call number is deleted.