Operation Manual

Call forwarding
65
Press menu. The main menu is displayed.
Search for the "Call forwarding" entry
using the control buttons (up/down).
Press the selection button next to
"Call forwarding".
The call forwarding menu is shown in the
display.
Press the selection button next to the
setting that you wish to change.
The cursor is located at the entry point.
Select the desired entry location us-
ing the control buttons (left/right) and
change it with the control buttons
(up/down).
The display shows the current setting.
or
When entering the target call number
set the first digit using the control
buttons (up/down).
Digits and special symbols are displayed.
The special symbols have the following
meanings:
~ = Wait for dial tone / 3 Sec. pause
i = Internal (for PABX)
F = Flash (short, for PABX)
H = Hook flash (long, for PABX)