Operation Manual

Settings
81
Change the settings using the control
buttons (up/down).
The display counts up or down.
For settings with several digits move
the entry location to the required lo-
cation using the control buttons
(left/right).
The selected entry location flashes.
To end digit entry press the selection
button next to the desired line again.
The entry location stops flashing.
To stop the entry press stop several
times.
The initial state is again displayed.
Adjusting the volume
You can set the volume when the device is in the initial state.
Set the volume using the control but-
tons (left/right).
The volume bar shows the current setting.