User guide
Simply IP Phone Getting Started
- 6 -
2. Subnet Mask：Pickup the handset and dial “**91#”
3. Gateway：Pickup the handset and dial “**92#”
4. DNS1：Pickup the handset and dial “**93#”
5. DNS2：Pickup the handset and dial “**94#”
The default network configuration:
IP Address 192.168.0.10
SUBNET_MASK 255.255.255.0
IP Address GATEWAY 192.168.0.1
Recovery Mode IP Address Server 192.168.0.5
Configuring via Web Page
Pick up the handset and dial out “**90#” to obtain the IP address of IP phone. Enter it
(for example http://192.168.3.28) into the address bar of web browser. The default
login name and password are both “admin”.
Note:
Please locate your PC in the same network segment of IP phone (192.168.3.X) to
access the web configuration page. Please consult your system administrator for help.
Network Settings
Choose Network->Internet Port（WAN）.
DHCP: By default the phone attempts to contact a DHCP Server in your network in
order to obtain its valid network settings, e.g. IP address, sub mask, gateway, DNS
server, etc.
Static IP Address: If your phone cannot contact a DHCP Server for any reason, you
need to enter the network settings manually via Static IP Address. Please contact your
internet administrator for more details.
Note:
Using the wrong network parameters may result in inaccessibility of your phone and
may also have an impact on your network performance. Please contact your network
administrator.
Account Settings
The phone attempts to register to the SIP server using the account data provided by the
automatic or manual initialization.
Choose Account, you will find the following parameters: