User guide

Simply IP Phone Getting Started
- 4 -
Configuration and Registration
If you are administrator, you need to do some simple configuration to make the phone
work. If not, please contact with your internet administrator or service provider for
more details.
Network Configuration
The network information can be set and check by the phone operations:
1) Network configuration
1. DHCP:
Pick up the handset and dial “**88#”, after hearing the prompt “Please enter the
value after beeping”, please input “1#” to enable DHCP，or “0#” to disable DHCP, you
will hear prompts “ Please hang up and wait for rebooting or continue setting after the tone ”
to indicate that the configuration is successful.. Input other characters or numbers
without #, for example input 222, you will hear prompts “Invalid setting, please
re-enter after the tone” to indicate that the configuration is failed.
2. Static IP:
IP Address: Pickup the handset and dial “**80#”, after hearing the prompt “ Please
enter the value after beeping ”, please input the IP address ( For example: 192.168.1.56#),
you will hear prompts “ Please hang up and wait for rebooting or continue setting after the
tone ” to indicate that the configuration is successful. If the input IP Address is not in
conformity with the rules or without #, it will prompt “ Invalid setting, please re-enter after
the tone ” to indicate that the configuration is failed.
Subnet Mask: Pickup the handset and dial “**81#”, after hearing the prompt
“ Please enter the value after beeping ”, please input the Subnet Mask (For
example:255.255.255.0#), you will hear prompts “ Please hang up and wait for rebooting
or continue setting after the tone ” to indicate that the configuration is successful. If the
input Subnet Mask is no in conformity with the rules or without #, it will prompt “
Invalid