Operation Manual

MyPBX Standard User Manual

www.yeastar.com Page 14

· DND

Don‟t Disturb.

· User Web Interface

Check this option to allow the user to login to the MyPBX User Web interface,

which can be used to access voicemail and extension recordings. Users may

voicemail PIN # as the login and password respectively.

·Ring Out

Check this option if you want to custom the ring time. Tone will stop over the

time defined.

8) Volume Settings

Rxgain: The Volume sent to FXS extension.

Txgain: The Volume sent out by the FXS extension.

9) Mobility Extension

MyPBX allows you to use your mobile phone as extension. If you set your mobile

phone as mobility extension and then you call MyPBX with this mobility phone,

you will hear a dial tone. MyPBX will recognize your call as a call from an

extension. You can dial the number of other extensions (Your caller ID will be

the number of your extension) and use all outbound route that your extension

can use of MyPBX.

·Mobility Extension Number

Don't forget to add the dial patterns of the outbound route at the beginning of

your mobile phone number when you fill in the mobility extension number filed.

E.g. if you want to set “15960XXXXXX” as mobile extension, and the dial pattern

of the outbound route is “9”; you should set “915960XXXXXX” here.

Note: If callback is enabled in the inbound route, the mobility extension

function of this inbound route will be disabled.

10) Spy Settings

MyPBX allows extension to monitor/barge in other conversation. Once this

feature is enabled, the extension has the ability to monitor/barge in other calls

using the feature codes for each spy mode, refer to 'Feature Codes' page for

more information.

·spy modes

There are 4 spy modes available for choice:

General spy: you have the permission to use the following 3 modes.