MW-CS@DEVAISE.COM BHZY006 V3.
INSTRUCTIONS Advice for the setup: persons 1. of adherence can cause serious injuries. 2. 3. Attention! Please note that at fist all screws and connects all elements loosely. The screws must only be way. Otherwise the setup joints, which always occur with so that the screw grips on its own with each other in this or the welded DO’S 1. Check the delivery content for completeness. Future complaints cannot be accepted. 2. 3.
If you have any further questions, please feel free to contact us by email or official website: www.devaise.com We will reply ASAP. Before installation, please make sure you have all the hardware, the serial numbers are properly labeled corresponging to the list, and the quantity is correct.
EXPLODED DRAWING A B C B B B B G E H D F ×4 PARTS 1 X32 M6x40 1 2 X16 M6x15 3 X1
REMARK Instruction of Torque Wrench: P B P P P When turning the screw clockwise, please turn the "P" to the left side. When turning the screw counterclockwise, please turn the "P'' to the right side. B NOTE： The torque wrench is the substitute of the allenkey which will help you to screw easier. B REMARK During assembly, please only slightly tighten all screws in their correct position first, then fully tighten them.
2 1 X16 M6x40 G 3 X1 D 1 ×4 E ×4 1 X16 3 M6x40 G 3 X1 D H E F 1 3 H ×4 ×4
4 4
