Notice: 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill Place the item on a flat ground to adjust and make sure it remains stable. Tighten up all screws with tools gradually: If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
Part list A B © Right frame (3 pes) Left frail (3 pcs) Chair back frame (2 pcs) E F
CHAIR ASSEMBLY STEP 1: Connect:Chair seat frame (D)& Left frame (B) with Bolt (1) & Washer (4) STEP 2:Connect part from step 1 & Chair back frame (C) with Bolt (1) & Washer (4) STEP 3: sonnet part from step 2 & Right frame (A) with Bolt (1) & Washer (4) STEP 4:Connect Right frame (A), Left frame (B) & Chair back fries {Cy with Bolt (2) & Washer (4)
STEP Chair cushion (H) to complete Chair BENCH ASSEMBLY STEP 6: Connect Bench seat frame (D) & Left frame (By with Bolt (1) & Washer (4) STEP 7:Connect part from step | & Bench back frame (C) with Bolt (1 y& Washer NAAN
STEP 8: Connect part.
TABLE ASSEMBLY STEP 11: Connect Table support bar (K) & 2 Table leg frame (1) with Bolt {3) & Washer (4) STEP 12:Connect part from step 11 & Table top frame (J) with Bolt Washer (4)
