Specification Sheet

We invite you to learn more about our products.
874 Old Albany Shaker Road
Latham, NY 12110
USA
http://www.tire-conversion.com
[e-mail]
518.372.1300
FEATURES
• Made of durable, molded
rubber
• Units easily t end to end to
accomodate the desired over-
all length
• Able to withstand extreme
temperatures without cracking
or drying out
• Features eight reective eye-
lets providing easy spotting by
motorists
• Grooved surfaces ensure grip
and traction even in adverse
weather conditions
SPEED BUMP :: VR-206-6M
SPECIFICATIONS
• Rubber speed bump middle
section with one half yellow
and one half black (End piec-
es sold seperately)
• Weight: 36lbs/16.33kg
• Height: 2”/0.58cm
• Length: 39.5”/100.33cm
• Width: 15”/38.1cm
• 8 holes molded in the prod-
uct for mounting to various
surfaces
• Holes are located 5” on center
from each end, then 9 7/8”
apar center to center
• Holes are 3 1/8” to center o󰀨
long edge
When designing parking lots, it is important to
ensure both pedestrian and driver safety. Using
bumps, humps and parking stops from TCT can
increase customer safety while limiting potential
damage. Speed bumps and humps ensure that
drivers decrease their speed in high-tra󰀩c ar-
eas, and are easily transported to wherever they
may be needed. They are made from durable
molded rubber that will withstand extreme tem-
peratures. The speed bumps and humps include
a textured surface, making them safe to use
in inclement weather. They can also be used
in construction areas to help slow down tra󰀩c
while keeping workers safe. The speed bumps
are easily set up wherever you need decreased
tra󰀩c speeds.
ADDITIONAL PRODUCTS
• Various fastener systems
used for mounting to di󰀨erent
surfaces: FS-1, FS-2 and
FS-3
• Corresponding end pieces:
VR-206-6E (sold seperately)