Specification Sheet

We invite you to learn more about our products.
874 Old Albany Shaker Road
Latham, NY 12110
USA
http://www.tire-conversion.com
[e-mail]
518.372.1300
SPEED BUMP :: VR-206-7M
FEATURES
• Made of durable, molded
rubber
• Perfect for indoor or outdoor
use
• Able to withstand extreme
temperatures without cracking
or drying out
• Features eight reective eye-
lets and eight mounting holes
• Grooved surfaces ensure grip
and traction even in adverse
weather conditions
• Capable of combining multi-
ple middle pieces together to
create length required
SPECIFICATIONS
• Rubber speed bump middle
section with one half yellow
and one half black (End piec-
es sold seperately)
• Weight: 35lbs/15.88kg
• Height: 2”/0.58cm
• Length: 39.25”/99.69cm
• Width: 13.5”/34.29cm
•
• 8 holes molded in the prod-
uct for mounting to various
surfaces
• Holes are located 4 7/8” on
center from each end, then 9
7/8” apart center to center
• Holes are 2 3/8” to center of
long edge
When designing parking lots, it is important to
ensure both pedestrian and driver safety. Using
bumps, humps and parking stops from TCT can
increase customer safety while limiting poten-
tial damage. Speed bumps and humps ensure
that drivers decrease their speed in high-tra󰀩c
areas, and are easily transported to wherever
they may be needed. They are made from du-
rable molded rubber that will withstand extreme
temperatures. The speed bumps and humps
include a textured surface, making them safe to
use inclement weather. They can also be used
in construction areas to help slow down tra󰀩c
while keeping workers safe. The speed bumps
are easily set up wherever you need decreased
tra󰀩c speeds.
ADDITIONAL PRODUCTS
• Various fastener systems
used for mounting to di󰀨erent
surfaces: FS-1, FS-2 and
FS-3
• Corresponding end pieces:
VR-206-7E (sold seperately)