User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM
TIREMONI USER MANUAL V2.1 23.05.2017 13
Power on LCD monitor
Slide the power switch followed by direction shown as below.
Now the LCD monitor will connect to relais and sensors and starts receiving signals from sensors. The
following screen will be displayed:
Note:
1. When batteries are getting low, the battery level will be displayed. Please refer to coming
explanation.
2. Before you are continuing to the next step, please switch on your display first.
3. Make sure battery polarity is correct when inserting batteries.
4. The system is designed for the convenience of user. Therefore, user doesn’t need to switch off
monitor and we even strongly suggest that user should keep the monitor power on all the time.
The monitor will automatically enter ‘sleeping mode’ when system is not in use.
Operation with cigarette lighter adapter cable
(permanent installation)
The display should best be operated from
on-board power using the cigarette lighter
adapter cable.
It will work equally well with 12 V DC or
24 V DC.