User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM

18 23.05.2017 TIREMONI USER MANUAL V2.1

F. Secure 3-way adapter with hex lock screw

Check for leaks after installation. Spread water over sensors and adapters and watch for bubbles.

Note (twin tyres):

In twin tyre operation the sensor must not be installed onto plastic valve extensions. Your tyre

dealer can supply suitable (pressure resistant) flexible valve extensions and metal clamps which

are suitable for installation of sensors on twin tyres.

Installation of relay under the vehicle (TM-260R and/or option for TM-240/260)

Metall frame for relay

Before installing the relay under the vehicle, please make sure to fix the supplied metal frame

firmly to the vehicle body. The metal frame can be installed by using a bolt. The metal frame

should be securely fastened to the body.

Note:

Please make sure that the vehicle body will not be damaged by the relay installation and that

driving safety will not be impaired.

The diameter of the bolt or screw should be in between 8 mm and 30 mm, so that the relay will be

securely installed during driving.

Vehicle body