User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM
20 23.05.2017 TIREMONI USER MANUAL V2.1
The following describes the assembly of the monitor holder:
A.Place the lock nut over the ball on the suction cup holder
B. Press the base for monitor holder onto the ball (see 1) until it clicks in place; then screw lock nut onto
the base and fix only lightly at this stage (see 2).
C. Hook the base for monitor holder into the back of the mounting frame; to do this press the mounting
frame against the base (3) and push the frame down (4) until the base clicks in place.