User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM
24 23.05.2017 TIREMONI USER MANUAL V2.1
When operating the system with 3 or 4 relais, the display space is not sufficient to show all the wheels in
the system. The first page is showing the tractor and the first trailer; the information from second and
third relay/trailer will be shown on page 2.
Toggle display pages by pressing the backlight button.
Advanced settings with buttons
In advanced settings, the three buttons play important roles to guide users to finish all settings.
Different definitions will be given and presented on the bottom of screen. Here is the simple chart of
their definitions in different setting modes:
Settings
In main screen
Mute
Temperature
Backlight
In advanced
settings
NEXT (go to next
option)
ESC (back)
ENTER (select and store
setting)
Adv. setting
SET UNIT
NEXT (go to next
option)
ADJ (jump ton ext
selection)
ENTER (select and store
setting)
Adv. setting
SET THRESHOLD
+
(increase value)
-
(decrease value)
ENTER (select and store
setting)
Adv. setting
SET CAR TYPE
NEXT (go to next
option)
PREV (go to
previous option)
ENTER (delect and store
setting)
Adv. setting ADD
NEW RELAY
NEXT (go to next
option)
/
ESC (back)
Adv. setting
ADD NEW SENSOR
/
/
ESC (back)
Pressing ’Mute’ for more than 3 seconds will open ‘advanced settings mode.’ In ‘advanced
mode’, there are 5 submenus you can configure as needed.