User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM
TIREMONI USER MANUAL V2.1 23.05.2017 31
5. ADD NEW SENSOR (Sensor ID learning procedure)
Symbol / Button
In main screen
Mute
Temperature
Backlight
In ADD NEW SENSOR
/
/
ESC (back)
When you need to replace any of the existing sensors with learnable sensor, you will need this
function. Normally, original sensor has its own identified number and you won’t need to do
anything with sensors. However, whenever you lost your original sensor or sensor is broken, you
will need to purchase a new ‘learnable sensor’ to replace. The ‘learnable’ sensor can be bought at
your local dealer or at http://shop.tiremoni.com.
Operation with Relais (260R):
In ‘ADD NEW SENSOR’ mode you will have screen display as below. (Different vehicle type will
have different display). Pressing the Mute button will CLEAR the display, pressing BACKLIGHT
button will store and Exit this mode.
At this point press RESET button on the relay. The display will beep and LED in relay will be
illuminated in red.
Press Reset-button
on bottom of relay
Red LED on
Press Reset-button
on relay