User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM
TIREMONI USER MANUAL V2.1 23.05.2017 33
Operating the System
Initialisation
In initialization stage, monitor will detect relay(s) and sensor(s) first and show all necessary
information after booting up.
Main screen
After booting up for around two minutes, system will enter main screen. Most of time, your
system will stay in this mode and response with the latest figures of both tyre pressure and
temperature.
Sleep mode
For power saving purpose, very intelligent design in this system could automatically enter sleeping mode
as long as the monitor has not been vibrated for more than 10 minutes. In this mode, monitor will be
turn off to save battery power. Any vibration such as open car door or push any of buttons, monitor will
be woken immediately. In relais operation the display will try to connect to the relais and receive data.
Note: If the display is in sleep mode, no data from relais or sensors will be received. Therefore in sleep
mode no warnings will occur and pressure values are not updated.