User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM
38 23.05.2017 TIREMONI USER MANUAL V2.1
2. No connection to relay
In this example truck relay (A) has no connection to display
A. Please make sure that relay is not too far from monitor. Maximum distance can be up to 200m;
interference and radio effects can considerably reduce available distance however.
B. Please make sure that relay is not installed inside a metal case. Radio range will be reduced to
zero by metal case.
C. Make sure that batteries are inserted in relay or that external power supply is working OK.
D. Please make sure that batteries are inserted with correct polarity.
E. Please check if batteries (display and sensors) are low. Batteries could be low after longer time
of operation and it is recommended to replace them.
F. Please make sure that relay is associated with the display. Each relay has its own ID and relay
needs to be programmed / associated with the display correctly.
G. If these solutions do not help improve the situation, consult your nearest TireMoni dealer or
contact TireMoni support: www.tiremoni.com/FAQ.html
3. No connection to sensor
In this example sensor A1 (front left) has no connection
A. Make sure that the sensor is installed on the corresponding wheel
B. Make sure that battery is correctly inserted in the sensor.
C. Please check if battery (display and/or sensor) is low. Battery could be low after longer time of
operation and it is recommended to replace it.
D. Please check if you have mixed up the sensor with a different system. Each sensor has its own
ID and the display can only receive "its own" pre programmed IDs for each wheel position.
E. If these solutions do not help improve the situation, consult your nearest TireMoni dealer or
contact TireMoni support: www.tiremoni.com/FAQ.html