User manual

TIREMONI TM-2X0 TYRE PRESSURE MONITORING SYSTEM
TIREMONI USER MANUAL V2.1 23.05.2017 9
Getting Started
System-Diagramm
Note: The 3-way adapter is not included. It is available as optional accessory.
Installation
Display and relais are best operated from on-board supply. Optionally, i.e. for temporary use display
and relais can also be operated from batteries. Here battery operation is explained first. Please follow
these steps to install the display, relais and sensors:
Installation procedure
1. Install batteries in relay
2. Install batteries in LCS monitor
3. Switch on LCD monitor
4. Insert batteries in sensors
5. Install sensors onto valves in place of dust caps.
Installation of relay (260R or optional retrofit for TM-240/260)
Battery operation (only temporary):
A. Open the battery cover of the relay by removing
the screws