* T-TOUCH EXPERT User’s Manual Acknowledgements We would like to thank you for choosing a TISSOT watch, a Swiss brand among the most highly renowned in the world. Your T-TOUCH watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays. In addition, the following functions can be accessed simply by touching the glass: Weather, Altimeter, Chronograph, Compass, Alarm and Thermometer. w ww. ti ss o t .
Official service centers adresses www.tissot.ch WARNING TISSOT TACTILE WATCHES MUST ONLY BE SERVICED BY TISSOT’S AUTHORIZED CUSTOMER SERVICE CENTERS, WHICH ARE LOCATED IN OVER 160 COUNTRIES Recommended service prices support.tissot.
T-TOUCH EXPERT * FUNCTIONS 2nd function 1st function 1st function 2nd function ACTIVATE TOUCHSENSITIVE GLASS ACTIVATE LIGHT ° Water resistance: 10 bar (100 m / 330 ft) Time T Time T2 Alarm 2 R Relative pressure, Active altitude difference meter A Absolute pressure, Azimuth Battery type: button-type lithiummanganese dioxide primary battery cell.
T-TOUCH EXPERT * GENERAL USER INFORMATION Activating the touch-sensitive glass Activating the light Setting mode Display mode Activate the glass 2 sec. 1 sec. 2 sec. The display light will stay on for 5 seconds. Date display = Default display Select a function When the glass is activated, the symbol will flash on the digital display. Time 1 display: T or Time 2 display: T2 If the glass is not touched, it will automatically deactivate after 15 seconds.
T-TOUCH EXPERT * READING > OPTIONS 1 sec. Activate glass Options display (see page 4) Climate zone display Back to units display Switch to sub-menus: Units display Beep display Automatic switch to standby mode after 5 seconds Beep every second At any time: exit sub-menu – back to date display SETTING > UNITS 2 sec.
T-TOUCH EXPERT * SETTING > STANDBY Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated. This mode economises the battery when the watch is not being worn.
T-TOUCH EXPERT * SETTING > SYNCHRONISATION The watch needs to be synchronised if the watch hands do not display the same time as the digital display, or if they are not correctly superimposed when accessing the functions. The watch is desynchronised when its electric motor’s mechanism is disturbed due to heavy impacts for example. N.B.: The glass must be active to access the synchronisation mode. ✓ Synchronised ✗ Desynchronised or 5 sec.
T-TOUCH EXPERT * GLOSSARY > WEATHER Description of function In weather mode, the hands are superimposed to indicate the weather trend. Explanations Weather changes are related to variations in atmospheric pressure. When atmospheric pressure increases the sky clears. The area is then referred to as a "high pressure" area or "anticyclone" (A). When atmospheric pressure decreases the sky clouds over. The area is then referred to as a "low pressure" area or "depression" (D).
T-TOUCH EXPERT * GLOSSARY > ALTIMETER Sequentiallly every 2 seconds 2 sec. 2 sec. Elapsed time or stopped time Total cumulative loss in altitude during elapsed time Mean vertical speed of descent (metres/minute or feet/minute) 2 sec. 2 sec. 2 sec. Altitude difference display Total cumulative gain in altitude during elapsed time Mean vertical speed of descent (metres/minute or feet/minute) Back: Elapsed time or stopped time 2 sec.
T-TOUCH EXPERT * CHRONO Resolution: 1/100 sec / Measurement range: 99 hrs 59’59’’ and 99/100 sec Chrono display Activate glass Start chrono Stop chrono Split (partial time) Start chrono Reset a) Flashing stop with partial time displayed, and chrono running in background b) Restart the chrono counting the elapsed time CHRONO > TIMER Stop chrono 27.12.07 Reset chrono 0.00.0000 0.00.0000 Measurement range: 23 hrs 59’59’’ Start/Stop 1 sec. Activate glass 27.12.07 0.00.
T-TOUCH EXPERT * COMPASS The minutes hand points to True North, factoring in the magnetic declination setting. In compass mode, the digital screen displays the angle between 12 o'clock and the minutes hand. 1 sec. Activate glass Compass display Azimuth display User compass calibration Back to compass display SETTING > COMPASS > MAGNETIC DECLINATION 2 sec.
T-TOUCH EXPERT * SETTING > COMPASS > COMPASS CALIBRATION 2 sec. Compass Calibration display Activate calibration mode – glass deactivated during calibration a) Calibration successful – data stored b) Calibration failed – repeat calibration Turn the watch more than a complete revolution on a horizontal surface (e.g. a table) in an environment free from magnetic interference, at a rotation speed of around 30° per second.
T-TOUCH EXPERT * ALARM The 2 alarms are associated with time T. An alarm lasts 30 seconds, without repeating. When the programmed time is reached, you can stop the alarm by pressing one of the push-buttons. Stop alarm or 1 sec. or Alarm 1 display Activate glass Alarm 2 display Alarm rings Stop alarm SETTING > ALARM 2 sec. 1 sec.
T-TOUCH EXPERT * SENSOR FAULT WARNINGS Battery type: button-type lithium-manganese dioxide primary battery cell. When a function is selected and the display is cleared, it is probably due to a failure of the selected function's sensor. To activate the functions on your T-TOUCH a gentle press on the push-buttons or touch on the glass is all that is required. Excessive force may damage the watch. The brightness of the digital display decreases when the hands are in motion.