Operation Manual

www.tissot.ch
147_EN
13/16
SAILING-TOUCH
*
Set a distance or a length to enable the SAILING-TOUCH to respectively calculate an average speed or an instantaneous speed.
2 sec.
Setting modeSpeed display
Validate setting
: increase length or distance
: decrease length or distance
SETTING > SPEED : DISTANCE AND LENGTH
or or
Description of function
This function uses the chronograph and a chosen distance to calculate either the average or instantaneous speed of a moving object such as a boat, a car, a bike or
a man.
Average speed
In order to calculate your average speed over a chosen distance, simply insert the distance in the watch using the pushers and use the chronograph to time your run.
Instantaneous speed
The speed function of your Sailing-Touch can also let you know the instantaneous speed of a moving object, e.g.: a boat. Enter the length of the boat in the watch
and time the boat when passing a fixed object. For example: start the chronograph when the prow of the boat reaches a buoy and then stop the chronograph when
the stern reaches the buoy.
Note 1
The distance of the run or the length can even be entered in the watch after timing.
Note 2
Measurement units can be changed in the options menu. See page 6 of this manual.
Note 3
“---kmh” in the display means that the chronograph was not activated.
Characteristics of function
Length and speed limit:
NM: 1 foot to 999 nautical miles / 0.1 to 999 knots
M: 0.1 meter to 999 kilometres / 0.1 to 999 kilometres per hour
MI: 1 foot to 999 miles / 0.1 to 999 miles per hour
GLOSSARY > SPEED