Operation Manual

www.tissot.ch

147_EN

7/16

Swap display Setting mode “Swap N” = No,

“Swap Y” = Yes

Validate setting

SETTING > SWAP

Swap mode allows the exchange of time T1 with time T2. Example: Before travelling, one can set the local time zone of the destination under

T2 and upon arrival use the swap setting to have local time displayed as T1. When returning simply swap the two time zones back again.

2 sec.

oror

Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated.

This mode economises the battery when the watch is not being worn.

Back to time & date mode

: stop the count,

the watch does not switch to standby mode

a) The watch is in standby

Automatic switch to standby

mode after 10 seconds

Beep every second

Back to time & date mode

SETTING > STANDBY