* SEA-TOUCH User’s Manual Acknowledgements We would like to thank you for choosing a TISSOT watch, a Swiss brand among the most highly renowned in the world. Your SEA-TOUCH watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays. In addition, the following functions can be accessed simply by touching the glass: Alarm, Compass, Temperature, Dive, Logbook, Chronograph. w w w. t i s s o t .
Official service centers adresses www.tissot.ch WARNING TISSOT TACTILE WATCHES MUST ONLY BE SERVICED BY TISSOT’S AUTHORIZED CUSTOMER SERVICE CENTERS, WHICH ARE LOCATED IN OVER 160 COUNTRIES Recommended service prices support.tissot.
SEA-TOUCH * FUNCTIONS 2nd function 1st function 1st function 2nd function N W E CAL S + NEW-YORK OPT T2 LONDON T1 ACTIVATE TOUCHSENSITIVE GLASS 27 december ACTIVATE LIGHT 27° Water resistance: 10 bar (100 m / 330 ft) Time zone 1 Time zone 2 Ante meridien Battery type: button-type lithium-manganese dioxide primary battery cell.
SEA-TOUCH * GENERAL USER INFORMATION Activating the touch-sensitive glass Setting mode Activating the light Display mode Activate the glass 2 sec. 1 sec. 2 sec. The display light will stay on for 5 seconds. Date display = Default display Select a function When the glass is activated, the symbol will flash on the digital display. If the watch is not manipulated, it will automatically deactivate after 15 seconds.
SEA-TOUCH * OPT READING > OPTIONS 1 sec. Options display (see page 4) Activate glass Back to units display OPT Beep display Switch to sub-menus: Units display Automatic switch to standby mode after 10 seconds Beep every second At any time: exit sub-menu – back to date display SETTING > UNITS 2 sec. or Units display OPT Setting mode Select mode 12/24 hours – in 12 hour mode, AM or PM appears in the display below the time Select Mode " º C " or " º F " Validate setting.
SEA-TOUCH * OPT SETTING > STANDBY Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated. This mode economises the battery when the watch is not being worn.
SEA-TOUCH * ALARM The alarm is associated with time T1. An alarm lasts 30 seconds, without repeating. When the programmed time is reached, you can stop the alarm by pressing one of the push-buttons. Stop alarm or 1 sec. or Alarm display Activate glass Alarm ring Stop alarm SETTING > ALARM 2 sec. or 1 sec.
SEA-TOUCH * CAL SETTING > COMPASS > COMPASS CALIBRATION 2 sec. Compass Calibration display Activate calibration mode – glass deactivated during calibration Turn the watch more than a complete revolution on a horizontal surface (e.g. a table) in an environment free from magnetic interference, at a rotation speed of around 30° per second.
SEA-TOUCH * 27° THERMOMETER 27° GLOSSARY > THERMOMETER Description of function In thermometer mode, your SEA-TOUCH displays the ambient temperature. 1 sec. Activate glass Thermometer display T˚ Explanations The temperature displayed corresponds to that of the watch case, so this temperature T˚ is influenced by your body temperature. That is why the temperature displayed may differ from the ambient temperature.
SEA-TOUCH * DIVE > AUTOMATIC START & STOP The watch automatically starts the dive mode at the latest 5 seconds after the depth limit of 1 m 40 (4.5 feet). The dive is saved in the logbook if the dive lasts more than 15 seconds. Dive Suspension Dive stopped 1 2 4.5 feet 1.40 m Automatic start of dive mode below depth of 1.40 m / 4.
SEA-TOUCH * LOGBOOK For all steps, if no manipulation of watch during 15 seconds, the glass desactivates and display shows LOG. 1 sec. Activate glass LOGBOOK display choose by date LOGBOOK display choose by max. depth or LOGBOOK display choose best dive or Choose date or Choose max. depth & dive duration or Date or Choose dive time on chosen date or Time Date or or Choose max. depth & dive duration or Time Max.
SEA-TOUCH * CHRONO Resolution: 1/100 sec / Measurement range: 99 hrs 59’59’’ and 99/100 sec 1 sec. Activate glass Chrono display Start chrono Split (partial time) Start chrono Stop chrono Reset a) Flashing stop with partial time displayed, and chrono running in background b) Restart the chrono counting the elapsed time Stop chrono Reset chrono WARNINGS Battery type: button-type lithium-manganese dioxide primary battery cell.