MULTI-SPORTS TACTILE WATCHES USER’S MANUAL Acknowledgements We would like to thank you for choosing a TISSOT watch, a Swiss brand among the most highly renowned in the world. Your multi-sports tactile watch has the most recent technical innovations. It gives you a constant analogue time display and a variety of digital displays. In addition, the following functions can be accessed simply by touching the glass: Alarm, Compass, Lap time, Split time, Timer and Tide. w ww. ti ss o t .
Official service centers adresses www.tissot.ch WARNING TISSOT TACTILE WATCHES MUST ONLY BE SERVICED BY TISSOT’S AUTHORIZED CUSTOMER SERVICE CENTERS, WHICH ARE LOCATED IN OVER 160 COUNTRIES Recommended service prices support.tissot.
MULTI-SPORTS TACTILE WATCHES FUNCTIONS 2nd function 1st function 1st function 2nd function ACTIVATE TOUCHSENSITIVE GLASS ACTIVATE ++ 27 27 december OPT OPT december -- N W N W LIGHT E S E S 10bar 10bar Water resistance: 10 bar (100 m / 330 ft) Battery type: button type lithium-manganese dioxide primary battery cell.
MULTI-SPORTS TACTILE WATCHES GENERAL USER INFORMATION Activating the touch-sensitive glass Activating the light Setting mode Display mode Activate the glass 2 sec. 2 sec. 1 sec. Activating the light - The display light will stay on for 10 seconds. Date display = default display Select a function When the glass is activated, the «T» symbol will flash on the digital display. Time1 display: T1 or If the glass is not touched, it will automatically deactivate after 15 seconds.
MULTI-SPORTS TACTILE WATCHES OPT SETTING > OPTIONS Use the options menu to access the main settings of the watch. 1 sec. Activate glass Options display (see page 4) Switch to sub-menu: Units display Automatic switch to standby mode after 10 seconds. Beeps every second Back to units display At any time: exit sub-menu back to date display OPT Swap timezones T1 with T2 SETTING > UNITS 2 sec.
MULTI-SPORTS TACTILE WATCHES OPT SETTINGS > SWAP Swap mode allows the exchange of time T1 with time T2. Example: Before travelling, one can set the local time zone of the destination under T2 and upon arrival use the swap setting to have local time displayed as T1. When returning simply swap the two time zones back again. 2 sec. or or Swap display OPT Setting mode «Swap N» = No «Swap Y» = Yes Validate setting SETTINGS > SLEEP Sleep (or standby) mode is a battery economy mode.
MULTI-SPORTS TACTILE WATCHES OPT SETTINGS > SYNCHRONISATION The watch needs to be synchronised if the watch hands do not display the same time as the digital display, or if they are not correctly superimposed when accessing the functions. The watch is desynchronised when its electric motor’s mechanism is disturbed due to heavy impacts for example. N.B.: The glass must be active to access the synchronisation mode. ✔ Synchronised ✗ Desynchronised or 5 sec.
MULTI-SPORTS TACTILE WATCHES TIDE The minute hand indicates the actual state of a tide at a chosen location and the hour hand shows the tendency to low or high tide. 1 sec.
MULTI-SPORTS TACTILE WATCHES LAP The lap function is a chronograph dedicated to measuring lap times of 1 runner / racer, etc. 1 sec. 1 sec. 1 sec. Activate glass Lap display Start lap chronograph with pusher First lap time is running Use the pusher to mark the end of each lap Last marked lap time is blinking for 10 seconds while next lap time is already running in background 1 sec.
MULTI-SPORTS TACTILE WATCHES SPLIT The split function is a chronograph dedicated to measuring total racing time of up to 99 racers competing in the same timed event. Example: measure the arrival time of several runners in a 100 meter race. 1 sec. 1 sec. 1 sec. Activate glass Split display Start split chronograph with the pusher Use the pusher to mark the arrival of up to 99 racers Last marked arrival time is blinking for 10 seconds while the total elapsed time is still running in background 1 sec.
MULTI-SPORTS TACTILE WATCHES N W E S COMPASS The minute hand points to magnetic North. By setting the magnetic declination the minute hand will indicate True Noth. In compass mode, the LCD displays the azimuth (angle between Heading (12 o’clock) and the North (minutes hand)). 1 sec.
MULTI-SPORTS TACTILE WATCHES N W E S GLOSSARY > COMPASS Compass In compass mode, your tactile watch indicates the magnetic North. By setting the magnetic declination in the watch, it will indicate True North. N Azimuth In compass mode, the LCD display of your tactile watch indicates the azimuth (heading or direction) that the watch (6-12 o’clock axis) is facing. Cap S Compass explanations The vertical lines (meridians) on the Earth converge at the True North Pole (Ng), indicating its direction.
MULTI-SPORTS TACTILE WATCHES TIMER Your tactile watch features 2 individual timers that can be set manually. Use the pushers to set a time in the timer function. 2 sec. or Activate glass First timer display Touch twice to access the second timer Setting mode : add time : remove time Validate setting or or Start or stop the timer w ww. ti ss o t .
