Operation Manual

www.tissot.ch
146_EN
10/12
T-TOUCH II
*
2
0
E
R
CAL
COMPASS
The minutes hand points to True North, factoring in the magnetic declination setting. In compass mode, the digital screen displays the
angle between 12 o'clock and the minutes hand. This angle is called azimuth and is used to obtain your heading shown at 12 o’clock on the
T-TOUCH.
1 sec.
Activate glass
Compass display
User compass calibration
Back to compass
display
SETTING > COMPASS > MAGNETIC DECLINATION
Compass display
: +/- 1 degree East
: +/- 1 degree West
Validate setting
2 sec.
or or
Setting mode and magnetic
declination display
SETTING > COMPASS > COMPASS CALIBRATION
Compass
Calibration display
Activate calibration mode
– glass deactivated
during calibration
b) Calibration failed
– repeat calibration
Back to compass display
Turn the watch more than a complete revolution on
a horizontal surface (e.g. a table) in an environment
free from magnetic interference, at a rotation speed
of around 30° per second.
Total time: 20 seconds maximum
a) Calibration successful –
data stored
2 sec.