Operation Manual

www.tissot.ch
146_EN
12/12
T-TOUCH II
*
Activate glass
Thermometer display
Description of function
In thermometer mode, your T-TOUCH dis-
plays the ambient temperature.
Explanations
The temperature displayed corresponds to
that of the watch case, so this temperature
is influenced by your body temperature. That
is why the temperature displayed may differ
from the ambient temperature.
To display the actual ambient temperature,
the watch needs to be taken off for 15 to
30 minutes, in order to be free from the influence of body temperature.
Characteristics of function
The temperature can be displayed in degrees Celsius [°C] or degrees Fahren-
heit [°F]. (See procedure to follow for changing units on page 5).
THERMOMETER
1 sec.
Conversion formulae: T
0
C = (T
0
F -32) x 5/9
T
0
F = T
0
C x 9/5 + 32
Measurement range: –5°C to +55°C / 23°F to 130°F
Accuracy: ± 1°C / ± 1.8°F
Resolution: 0.1°C/ 0.2°F
GLOSSARY > THERMOMETER
To activate the functions on your T-TOUCH a gentle press on the push-buttons or
touch on the glass is all that is required. Excessive force may damage the watch.
The brightness of the digital display decreases when the hands are in motion.
In fast continuous setting mode, the display moves at a faster rate (e.g. for date
function: months or years instead of days) than in non-continuous or normal speed
setting mode (e.g. for date: days instead of months or years). To exit fast continu-
ous setting mode, you need to release the push-pieces for 3 seconds to continue
in normal speed setting mode.
The T-TOUCH is water-resistant to 10 bar (100 m / 330 ft) at 25°C / 77°F, but it is
not an instrument suitable for sports diving. You must not use push-buttons when
the watch is underwater. None of the functions can be activated if the glass is in
contact with a liquid.
Additional information in the "International Warranty – Service centers" booklet
SENSOR FAULT
5 sec.
When a function is selected and the display is cleared, it is probably due to a
failure of the selected function's sensor.
Battery type: button-type lithium-manganese dioxide primary battery cell.
Error: the display is cleared
Back to date display
If this happens, please contact your retailer.
WARNINGS