5. Select “Install the Selected port” and it displays the printers that can be connected to a PC. Printers on other networks are not included in the list. Click “Next” to proceed. Uninstall Program 1. Select “Start → All Programs → POINTMAN → Uninstall” and click “Yes”. 2. When the program is removed, click “OK”. (Restart your computer after uninstalling the program.) 6. Click “Finish” to complete the installation process.
-Change Printer Port (Using the Printer Driver) 4. Select the port you want to use and click “OK”. USB Port: CITUSB (Local Port) 1. Go to “Hardware and Sound → Devices and Printers” in the “Control Panel”. 2. Right-click “Card Printer” and select “Properties (or Printer Properties)”. Network Port: Refer to "Configure Network Settings" (P36) and select the port (IP address) accordingly. 3. Select “Ports (or Advanced)” tab in the “Card Printer Properties”.
-Select Input Hopper in the Printer Settings 3. Make sure that the printer is on, and click “Load” to activate the Input Hopper Option. 1. Go to “Hardware and Sound → Devices and Printers” in the “Control Panel”. 4. Select “Hopper Option” and click “Save” to save the new settings. 2. Right-click “Card Printer” and select “Printing Preferences”. 5. Click “OK” to close the General Setting tab. 3. Go to “Printer Setting → General Setting” in the “Control” tab.
- Select Input Hopper 1/2 from External Program (Windows Preview) 1. Right-click the image you want to print and select “Preview”. Print Using Application Programs & Configure Driver Settings -Print Using Application Programs 1. Specify the paper as 53.98mm x 85.60mm to print cards using application programs e.g. Excel, Word. 2. Click “Print” in the “Application Program - File” menu to open the print settings.Select “Card Printer” in the settings and click “Print” or “OK” to print.
① Layout ② Output Item Description Item Ribbon Setting Sets the card orientation (Landscape, Portrait) Page Order Sets the order for printing pages. Duplex Print Prints on both sides of the card. Page Format This option is not used by a card printer. Black Panel Selects the K panel for printing black text and black & white images included in the document. 180 Rotation Rotates the document 180 degrees. Printer Setting Overlay Panel Using the printer command (TPCL) 2.
④ Image ③ Output-Option Item Printing Options Output Options 54 Item Description Printing Process Display at LCD Printing Process Display on LCD Display the information of ribbon Displays residual count of ribbons. This information is only available for ribbons with an RFID tag, and the value is 40 or less. Color Level Sets the number colors used for printing. Printing Method Sets the print mode for ribbon’s movement while printing. 1-pass: All YMCKO data is transmitted before printing.
⑤ Magnetic ⑥ Control Item Item Magnetic Encoder Settings Format Sets the encoder format of the magnetic stripe. Coercivity Sets the coercivity type of magnetic stripe. Enable macro processing Encoding Direct Encoding /Decoding Description Sends data to the magnetic stripe. When enabled, it detects the start and end of the encoding data from text format and processes it with Magnetic Stripe Encoding data.
2. When “USER MODE” is indicated in the LCD display, hold “RIBBON SET” button. ⑦ About USER MODE 3. When “USER MODE” is indicated in the LCD display, press the “RIBBON SET” button to go into “3. SET MODE”. Then, hold down the “RIBBON SET” button. Check Go up the menu: Press the “EJECT” button. This tab displays the version information. Go down the menu: Press the “RIBBON SET” button. Check IP Address & Print Test Card SET MODE 4.
5. To go into STAND-BY mode, hold down both the “EJECT” and “RIBBON SET” buttons to go to the previous menu (“4. NETWORK CONFIG”). Then, hold down the “EJECT” button to enter STAND-BY mode. IP/SUB/GATEWAY 5. Click “Card Printer Document Properties → Control tab → Direct Printer Control → Self Printing”. NETWORK CONFIG P/SUB/GATEWAY 6. “Self Printing” is indicated on the LCD display as a test card is printed so that you can check the printing quality. ② If Not Connected to a PC: User Mode 1.
4. Hold down the “RIBBON SET” button in the USER MODE, and go into the “1. DIAGNOSIS” menu. Maintenance Instructions -Supported Cards This card printer may not support certain types of PVC cards. Please use the following PVC cards to prevent any issues and achieve the highest printing quality. ① Size DIAGNOSIS 5. Hold down the "RIBBON SET" button in the "DIAGNOSIS → 1. SELF PRINT" menu to start printing a test card. - International Standard (ISO CR80-ISO7810) - 53.98mm (W) x 85.60mm (L)/3.375”x2.
-Clean Inside the Printer Using Cleaning Kit Clean inside the printer using the cleaning kit every month or every 1000 cards T Cleaning Card Insert one third of the T Cleaning Card to the card tray as shown in the picture. (Make sure to remove the Input Hopper before inserting it.) Make sure to follow the instructions provided below on a regular basis as dusts or contaminants may affect the printing quality or damage the parts.
4. Hold down the “RIBBON SET” button in the “USER MODE” to go into “1. DIAGNOSIS”. 7. When the LCD display indicates “CLEAN COMPLETE”, removes the cleaning card. Then, press both the “EJECT” and “RIBBON SET” buttons to go back to the “DIAGNOSIS” menu. USER MODE USER MODE 5. When the LCD display indicates "1. DIAGNOSIS", press the "RIBBON SET" button to go into "2. CLEAN MODE". DIAGNOSIS Do not use the printer for 2-3 minutes Caution until the alcohol solution is fully dried. 8.
3) Connected to a PC ③ Clean the Printer Using Alcohol Swab and Cleaning Pen 1. Turn off the printer and remove the card and ribbon. Then, close the cover and turn it on. You can clean the printer's TPH and sensor and wipe the ink and dusts using an alcohol swab and cleaning pen. 2. Go to "Control Panel → Hardware and Sound → Devices and Printers" and right-click the "Card Printer" driver icon. Then, select "Printing preferences". 3.
2) Clean the Printer's TPH Using Cleaning Pen and Alcohol Swab -Clean the Cleaning Roller t is recommended to clean the printer at least once a month or whenever you replace the ribbon. 1. Turn off the printer connected to a PC and unplug the power adapter. 2. Clean the main body of the TPH using the cleaning pen or cotton swab before cleaning its head. Cleaning Roller 3. Make sure to clean under the two green wires using the cleaning pen as shown in the picture.
1) Replace the TPH ② Card Feeding 1. While pressing down the Top Cover and the TPH hold button with one hand, pull the TPH by its body upward while pushing it inside. Code 12 Code Name Card Jammed Description Solution The card is jammed in the path. Check the path to see if the card is jammed. 1) Remove Jammed Card 1. Open the side cover by holding the area highlighted by the circle and pushing it towards the front of the printer as shown in the picture. 2.
-Warning ③ Ribbon Code 14 Code Name Ribbon Encoder Error Description Disconnected ribbon, Ribbon end or encoder error occurs. Solution Check the Ribbon and Ribbon encoder status. ④ Card Code Code Name Description Solution ①Card Code Code Name Solution 23 [IC] Contact Error 24 [MS] Encoder Error An MS encoding error occurs. Check the MS module. 25 [MS] Read Error All 3 MS tracks fail to read. Check the MS module. Check the IC contact module.
④ Miscellaneous Code Code Name Description Solution 20 Command Error The command is not compliant with the specifications. 21 Parameter Error The parameter is not Send the parameter command. valid. 22 Main Communication Part Timeout The command is not sent on time. Send compliant command. Send the command. One of the following steps must be taken to recover the printer from the error state: 1) Press the "RIBBON SET" button with the ribbon installed.
⑤ Card Capacity ④ Memory - 128 MB RAM - Auto Feed Input: 100 standard format cards (0.76mm) Up to 200 cards with optional input hopper. - Auto Feed Output: 60 cards (0.76mm) - Single Card Printing Input/Output: 1 card -Optional Accessories -Optional Accessories -Optional Input Hopper(increase the capacity from 100 to 200 cards) - Input Hopper Lock (N20/N30) - Ribbon Lock - Kensington Lock (for theft prevention of the printer) ⑤ Interface - USB 2.
Regulatory -RoHS -FCC FCC IDENTIFIER : XTNNUVIA Name of Grantee : TIT ENG Co.,Ltd. Equipment Class : Part 15 Low Power Communication Device Transmitter Notes : ID Card Printer FCC Statement CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This document is the copyright of T.I.T ENG Co., Ltd. and may not be reproduced in full or in part by any means, electronic or otherwise, without the prior written consent of T.I.T ENG Co., Ltd. The Company would be very grateful if any accidental inaccuracies could be pointed out to us, as well as any other constructive criticism which might lead to a better understanding. T.I.T ENG Co.,Ltd. 7th Floor, Shin-do B/D, 215, Jungdae-ro, Songpa-Gu, Seoul, Korea, ZIP:136-160 sales@pointman.co.