User's Manual

③ Output-Option
Printing Process
Display at LCD
Printing Process Display on LCD
Display the
information of
ribbon
Displays residual count of ribbons.
This information is only available for ribbons with an RFID
tag, and the value is 40 or less.
Color Level Sets the number colors used for printing.
Printing Method
Sets the print mode for ribbon’s movement while printing.
1-pass: All YMCKO data is transmitted before printing.
3-pass: All YMCKO data is transmitted, and the transmitted ribbon is
printed.
Dithering only applies to the data transmitted to the black panel
of the ribbon.
Dithering
Reverse Print Reverses the document.
Mirror Print
Print a mirror image of the document (flipping the image
horizontally).
Prints any color text in black.
Printing the color
text to black
ribbon(K)
④ Image
Brightness Sets the brightness of the printed card.
Contrast
Sets dark areas as darker and bright areas as brighter.
Sharpening
Increases the contrast of adjacent pixels to make the
image look sharper..
Diffusion
Use Color Profile
This filter adjusts the contrast of the edge details and creates
brighter and darker lines on each plane of the edge, resulting
in a sharper image with clearer outlines.
Mixes the pixels of an image and makes it look blurry.
Supports more colors by using the color profile.
54 55
Printing
Options
Adjust
Image
Item Description
Output
Options
Item Description
Install printer and ready POINTMAN User Guide Manual