PRO
Contents 29 Install Program System Requirements Safety Precautions 06 Getting Started 09 ① Supported Operating System 29 ② Recommended Specifications 29 Install Software 29 Product Overview 09 ① Install Software Using Local Port (USB) 29 In the Box 09 ② Install Software for Network Printer 31 ③ Configure Networking Settings 36 N a m e s o f Pa r t s 10 1)Network Configuration Window 36 2) DHCP (Dynamic Host Configuration Protocol)? 37 12 3)Network Settings - Automatic (DHCP sup
Check IP Address Print Self-Test Card 58 60 ① If Connected to a PC 60 ② If Not Connected to a PC: User Mode 61 Maintenance Instructions Supported Cards 63 63 76 76 76 Ribbon Specifications Color Ribbons 76 Monochrome Ribbons 76 77 Printer Specifications ① Size 63 ② Thickness 63 Product Features 77 63 Standard Specifications 77 ③ Acceptable Cards ④ Unacceptable Cards: Clean the Printer 63 Clean the Printer 63 Clean the Exterior 63 Clean Inside the Printer Using Cleaning Kit ①
Safety Precautions -Warning These warnings must always be followed; otherwise, serious injury may result. Before using this product, please make sure that you have read the safety precautions described below. The safety precautions noted on this page are categorized as Warning, Caution, Attention,and Note. We are not responsible for any injuries or damage when the product is not used in compliance with these precautions. Power - Do not use a damaged plug or loose outlet.
-Caution Not following this caution can cause service interruption or product damage. Getting Started -Product Overview Thank you for purchasing the NUVIA series-N10, N20, N30. Installation/ Storage - Do not install the printer on an unstable surface. - Do not place the printer under direct sunlight as it may cause a malfunction. This printer is designed to print cards quickly and easily according to your specifications.
Names of Parts -N10 (Manual Feeding, Single-sided Printing) Name LCD Display OPTION 10 Description Name Displays the printer’s operation status on the LCD screen. Ethernet Port Used to connect to a network using a LAN cable. Description USB Port Used to connect to a PC using a USB cable. USB Socket Used to insert USB memory media or to connect to a PC. Single Card Slot Used to insert or release a single card. Power Supply Port Connects to the power supply.
-N20 (Auto Feeding, Single-sided Printing) Name LCD Display 12 Description Name Displays the printer’s operation status on the LCD screen. Ethernet Port Used to connect to a network using a LAN cable. Description USB Port Used to connect to a PC using a USB cable. USB Socket Used to insert USB memory media or to connect to a PC. Single Card Slot Used to insert or release a single card. Power Supply Port Connects to the power supply.
-N20 (Auto Feeding, Double-sided Printing) Name LCD Display Description Name Displays the printer’s operation status on the LCD screen. Ethernet Port Used to connect to a network using a LAN cable. Description USB Port Used to connect to a PC using a USB cable. USB Socket Used to insert USB memory media or to connect to a PC. Single Card Slot Used to insert or release a single card. Power Supply Port Connects to the power supply.
-N30 (Auto Feeding, Double-sided Printing) Name LCD Display Description Name Displays the printer’s operation status on the LCD screen. Ethernet Port Used to connect to a network using a LAN cable. Description USB Port Used to connect to a PC using a USB cable. USB Socket Used to insert USB memory media or to connect to a PC. Single Card Slot Used to insert or release a single card. Power Supply Port Connects to the power supply.
Load cleaning Roller & Ribbon -Load Ribbon Ribbon RFID Tag -Load Cleaning Roller 1. Press the “Open” button and lift the Top Cover all the way as shown in the picture. Caution - Do not close the cover by force when the ribbon is not placed properly as this may cause damage. - If the Top Cover is not closed, the printer may not print properly (make sure it is closed completely). - Make sure that the Ribbon RFID Tag is positioned correctly. 1.
