User's Guide

ATOP3.5G Hardware User Guide
80447ST10636A rev.15 – 2019-11-21
Reproduction forbidden without written authorization from Titan Communications S.p.A. - All Rights
Reserved. Page 63 of 69
Mod. 0808 2011-07 Rev.2
21 Legal information
21.1 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Titan does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Titan sales office. In case of
any inconsistency or conflict with the short data sheet, the full data sheet
shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Titan and its customer, unless Titan and customer have explicitly agreed
otherwise in writing. In no event however, shall an agreement be valid in
which Titan’s product is deemed to offer functions and qualities beyond
those described in the Product data sheet.
21.2 Disclaimers
Limited warranty and liability — Information in this document is believed
to be accurate and reliable. However, Titan does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Titan takes no responsibility for
the content in this document if provided by an information source outside of
Titan.
In no event shall Titan be liable for any indirect, incidental, punitive, special
or consequential damages (including - without limitation - lost profits, lost
savings, business interruption, costs related to the removal or replacement
of any products or rework charges) whether or not such damages are based
on tort (including negligence), warranty, breach of contract or any other
legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Titan’ aggregate and cumulative liability towards customer for
the products described herein shall be limited in accordance with the Terms
and conditions of commercial sale of Titan.
Right to make changes — Titan reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Titan makes no representation or
warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Titan products, and Titan accepts no liability for any
assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether Titan’s product is suitable and fit for
the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Titan does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Titan products in order to avoid
a default of the applications and the products or of the application or use by
customer’s third party customer(s). Titan does not accept any liability in this
respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Titan products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.Titan.com/profile/terms, unless otherwise agreed in a valid
written individual agreement. In case an individual agreement is concluded
only the terms and conditions of the respective agreement shall apply. Titan
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Titan products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein may
be subject to export control regulations. Export might require a prior
authorization from competent authorities.
ATOP product — Any offer of Titan’s ATOP to customers (“CUSTOMER”) is
subject to the following conditions:
CUSTOMER recognizes that since the parts were not originally designed for
automotive use, it will not be possible to achieve the levels of quality and
failure analysis that are normally associated with parts explicitly designed for
automotive use.
CUSTOMER further recognizes that Titan is not obligated to qualify the
ATOP Product to the AEC-Q100 automotive quality standard or indeed to
any other such existing or future automotive industry standards. Note that
the AEC-Q100 applies to Integrated Circuits and was not designed for
modules such as ATOP.
Subject to the foregoing, in the event that CUSTOMER designs-in and uses
the ATOP OM120xx beyond Titan’ then existing ATOP OM120xx Product
specification (latest version of the ATOP OM120xx Datasheet), CUSTOMER
understands and agrees:
(a) that CUSTOMER shall use ATOP OM120xx Product without Titan’s
warranty;
(b) that such use shall be solely at the CUSTOMER’s own risk;
(c) to fully indemnify Titan for any liability, damages or failed.
ATOP OM120xx Product claims resulting from such use.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.