Install Instructions

installation Instructions
1. Determine the capacitance required for the motor(s) or
compressor(s) being operated.
2. Refer to chart for correct conguration.
3. Use jumper wires to make correct values.
4. Use the pen provided in the box to record the values you have
used on the capacitor.
5. Secure the capacitor to the motor using original mountings
or zip ties. CAUTION: It is important for proper operation
that the capacitor is adequately ventilated. Do not mount in
the cardboard packaging or in any manner that insulates the
capacitor or restricts air ow around it.
6. Connect leads from the motor(s) to the capacitor. If two motors,
the common (black) terminal ONLY should be used for both.
Instrucciones
1. Determinar la capacidad requerida para el motor(es) o compresor(es)
que esta operando.
2. Consulte la conguración correcta en la esquema.
3. Utilice los cables de conexión para obtener el/los valor(es) correcto(s).
4. Utilice el bolígrafo para registrar los valores que ha utilizado en las
casillas correspondientes que aparecen en el capacitor.
5. Asegure el capacitor al motor utilizando montajes originales o bridas.
PRECAUCIÓN: Es importante para la operación adecuada que el
capacitor esté adecuadamente ventilado. No lo monte en el cartón ni
de ninguna manera que aísle el condensador o restrinja el ujo de aire
a su alrededor.
6. Conecte el cable de el/los motor(es) al de el/los capacitor(es). Si son
dos motores, el terminal común (negro) puede SOLO ser utilizado para
ambos motores.
Total
2.5
5
7.5
10
12.5
15
17.5
Total
5
10
15
30
35
40
45
~ = jumper wire connection ~ = jumper wire connection~ = jumper wire connection ~ = jumper wire connection
Example of a single-rated
wiring conguration
Example of a single-rated
wiring conguration
Example of a dual-rated
wiring conguration
Example of a dual-rated
wiring conguration
Total
2.5+5
2.5+10
2.5+15
5+10
5+12.5
7.5+10
Total
5+10
5+30
5+40
10+30
10+35
15+30
Terminal
2.5
5
2.5 ~ 5
10
2.5 ~ 10
5 ~ 10
2.5 ~ 5 ~ 10
Terminal
5
10
5 ~ 10
30
5 ~ 30
10 ~ 30
5 ~ 10 ~ 30
Terminal(s)
(2.5)+(5)
(2.5)+(10)
(2.5)+(5 ~ 10)
(5)+(10)
(5)+(2.5 ~ 10)
(2.5 ~ 5)+(10)
Terminal(s)
(5)+(10)
(5)+(30)
(5)+(10 ~ 30)
(10)+(30)
(10)+(5 ~ 30)
(5 ~ 10)+(30)
Connect across Common Terminal and Jumped Terminal(s) Connect across Common Terminal and Jumped Terminal(s)
TFX17.5 TFX45
SINGLE SINGLE
DUAL DUAL
Installation instructions
Common
C
17.5
f
5
2.5
10
TFX45
Common
C
45
f
5
3010
Common
C
10
7.5
f
f
5
2.5
10
TFX45
Common
C
15
f
5
3010
30
f
multi
-
rated run capacitor
packardonline.com
800.334.1769
kennesaw, GA
chandler, AZ
Indianapolis, IN